Contact
  • Login
    • Menapace Nucleus Divider

    Product number: 55485

    Designed for use exclusively in left hand. Three dimensionally angled tip. Distal end of 2 mm length.
    Devgan Universal Cataract Chopper/Multi-Tool

    Product number: ET0703

    This universal cataract instrument is designed to allow multiple functions in one simple and efficient instrument. The chopping tip is designed to provide excellent control of the nucleus with vertical, horizontal or tilt-chop, as well as other techniques. The gently curved and smooth tip, designed to protect the posterior capsule, features grooves intended to engage the optic or haptics for IOL manipulation and for iris push-pull in small pupil cases. A traditional spatula is designed for intraocular manipulation of iris, lens fragments and vitreous. Overall length 137mm.
    Braga-Mele Quick-Chopper

    Product number: E0756

    The slender tip of this instrument provides excellent penetration into the lens. The tip has been blunted to reduce the chance of posterior capsule interference. The instrument is easily rotated under the lens to support and raise quadrants into the tip of the phaco handpiece. The interior of the tip is sharp and is ideal for moderate to dense nuclei. Overall length: 115mm.
    Nagahara Nucleus Chopper Right

    Product number: E0578 R

    Nucleus divider with 1.75mm tip and blade offset at a 60° angle is ideal for performing the “Phaco Chop" technique to be used in right hand. Round knurled handle. Overall length: 114mm.
    Grayson Biaxial Combo Manipulator

    Product number: E0578 L

    Nucleus divider with 1.75mm tip and blade offset at a 60° angle is ideal for performing the “Phaco Chop" technique to be used in left hand. Round knurled handle. Overall length: 114mm.
    Nichamin Double-Ended Nucleus Chopper Spatula

    Product number: E0570 N

    Wedge-shaped chopper designed to allow nucleus chopping in three directions, tip length 1.25mm. Rounded tip highly polished to protect the posterior capsule. 0.5mm spatula end is used to manipulate softer nuclei. Round knurled handle. Overall length: 140mm.
    Haefliger Phaco Cleaver

    Product number: 55306

    left. enlarged surface and cutting edge facilitate the manipulation of the nucleus with less risk of damage to the posterior capsule. 100 mm
    Haefliger Phaco Cleaver

    Product number: 55305

    right. enlarged surface and cutting edge facilitate the manipulation of the nucleus with less risk of damage to the posterior capsule. 100 mm
    Barrett Micro Mushroom Manipulator

    Product number: E4933

    Ideal for nucleus manipulation during phacoemulsification. Also used for manipulating and rotating IOLs within the anterior chamber. Round knurled handle. Overall length: 118mm.
    Koch Stop and Chop Manipulator

    Product number: E0713 G

    angled shaft with 1.5 mm Tip. Designed to efficiently perform the "Stop and Chop" technique. Overall length 112 mm
    Drysdale Nucleus Manipulator

    Product number: E0629

    Flattened paddle tip with generous surface area is ideal for manipulating tissue, rotating, and cracking the nucleus. Round knurled handle. Overall length: 110mm.
    Maloney No-Hole Manipulator

    Product number: E0579

    Teardrop shape tip with post. Round knurled handle with dull finish. Overall length: 124mm.
    Lester Lens Manipulator

    Product number: E0571

    Straight shaft with 0.2mm hourglass shape tip. Round knurled handle with dull finish. Overall length: 115mm.
    Neuhann Nucleus Rotator

    Product number: 55415

    with horizontal "Y-Hook". Overall length 104 m
    Y-shaped Nucleus Rotator

    Product number: SUF06

    With vertical "Y-Hook". Packaged single. Sterile. 12/box.
    Y-shaped Nucleus Rotator

    Product number: SUF05

    With horizontal "Y-Hook". Packaged single. Sterile. 12/box
    Drysdale type Nucleus Manipulator

    Product number: SUF04

    Flattened paddle tip with generous surface area is ideal for manipulating tissue, rotating and cracking the nucleus. Packaged single. Sterile. 12/box.
    Sinskey IOL Hook

    Product number: SUF02

    Angled shaft with 0.5mm tip and 0.18mm diameter. 115 mm overall length. For lens dialing and manipulation. Packaged single. Sterile. 12/box.
    Koch Stop & Chop Manipulator

    Product number: SUF01

    Angled shaft with 1.4 mm tip. 10 mm shaft length. Overall length 116 mm. Designed to efficiently perform the "Stop and Chop" technique. Packaged single. Sterile. 12/box.
    Bechert Nucleus Rotator Titanium

    Product number: ET4937

    Y shape rotator tip. Shaft angled 7mm from tip to bend. Round knurled handle with polished finish. Titanium. Overall length: 124mm.
    Anderson-Barrett Manipulator

    Product number: ET1104

    This manipulator has tapered shafts to help reduce side port leakage. The double-ended instrument has a nucleus chopper at one end combined with a mini Barrett mushroom tip on the opposite end for manipulation of iris, capsule, lens fragments and intraocular lenses. Titanium. Overall length: 130mm.
    Maloney Quick-Chop Chopper

    Product number: ET1103

    This double-ended manipulator was designed to facilitate supracapsular and endocapsular procedures. The manipulator is used in conjunction with the phaco tip to separate the nucleus in a “Quik-Chop" technique developed by Dr. William Maloney. Titanium. Overall length: 130mm.
    Koch Stop and Chop Manipulator Titanium

    Product number: ET0713

    Angled shaft with 1.5mm tip designed to efficiently perform the “Stop and Chop" technique. Round knurled handle. Titanium. Overall length: 112mm.
    Seibel Ambidextrous Chopper

    Product number: E0590

    Olive tip on instrument provides safety for the posterior capsule. Oval shaft behind tip provides efficient chopping of the lens nucleus. Overall length: 117mm.
    Brody Multipurpose Manipulator

    Product number: E0636

    Designed to manipulate and chop lenses during Phacoemulsification. The broad surface facilitates moving lens fragments to the needle while the front and rear notches allow hooking and pushing iris tissue, placement and removal of pupil expansion rings and IOL manipulation. Overall length: 110mm.
    Snapper Lens Chopper

    Product number: E0729

    Designed to gently manipulate the cataract during lens removal. The blunt leading surface is designed to be atraumatic while the inner aspect provides a wedge-shaped chopping edge for efficient dissection of the lens nucleus. Angled shaft offers flexibility and ease of manipulation. Overall length: 112 mm.
    Osher "Y" Hook

    Product number: E0577

    Designed for manipulating one piece lenses. The “Y" hook is excellent for capturing haptics and centering the lens. Straight shaft with “Y" shaped tip. Round knurled handle with dull finish. Overall length: 124mm.
    Fenzl Insertion Hook

    Product number: E0572

    Angled 45°, 10mm shaft with 0.2mm tip. Round knurled handle with dull finish. Overall length: 117mm.
    O'Gawa Lens Dialer

    Product number: E0569

    Excellent for manipulation of the intraocular lens in the capsular bag. The angled and curved shaft allows the instrument to reach across the implant and catch the optic/haptic junction to facilitate dialing the lens. Overall length: 120mm.
    Sinskey Iris and IOL Hook

    Product number: E0545

    0.2mm hook with straight shaft and flat serrated handle. Used to mark the visual axis. Polished finish. Overall length: 118mm.
    Clayman Guide

    Product number: E0542

    0.2mm Sinskey hook with shaft angled 45°. 10mm from tip to bend. Flat smooth handle with polished finish. Overall length: 116mm.
    Sinskey Hook II Round Handle Titanium

    Product number: 6-250

    0.18mm diameter angled tip, 10mm angled shaft. Used to mark the visual axis. Round knurled handle with dull finish. Titanium. Overall length: 119mm.
    Nucleus Dividing Hook

    Product number: 55483

    This instrument has a 45 ° angle and is designed for chopping and manipulating the nucleus. Overall length is 100 mm
    Nucleus Spatula and Chopper Double Ended

    Product number: 55482

    Double ended instrument: The chopper on one end is designed for chopping the nucleus. The spatula on the other end is used for the manipulation of nucleus and IOL. Overall length is 126 mm
    Iris Hook and Nucleus Chopper Double Ended

    Product number: 55481

    Double-ended instrument: The chopper on one end is designed for chopping the nucleus. The iris hook on the other end is used for the manipulation of tissue, nucleus and IOL. Overall length is 125 mm
    Y-Nucleus Manipulator and Chopper Double Ended

    Product number: 55480

    Double ended instrument: The chopper on one end is designed for chopping the nucleus. The Y manipulator on the other end is used for the manipulation of tissue, nucleus and IOL. Overall length is 122 mm
    Reposition Hook, Model Frankfurt

    Product number: 55300

    0.2 mm hook. 90° angled. Overall length 136 mm

    Who we are

    Our Instruments

    News

    Service

    Legal

    Links

    © 2025 Bausch & Lomb Incorporated. This site is intended for Healthcare Professionals in EMEA only. All information and materials on this site pertain to the Bausch & Lomb EMEA Region, unless otherwise indicated.