Contact
  • Login
    • Klein Eye Shield, sterile, single-use

    Product number: SUA01

    Klein Eye Shields are made from white plastic. 75 mm. White. 13 holes of 6 mm Ø. Packaged 24/box.
    Viscoelastic Cannula 25 Gauge

    Product number: SD2639/10

    25 Gauge. Angled 35°, 9mm from tip. Overall length excluding hub: 22mm. Packaged sterile. Single-Use. 10/box.
    Helsinki Curved Hydrodissector 27 Gauge

    Product number: SD5155/10

    27 gauge. Tip flattened in horizontal plane. Overall length excluding hub: 22mm. 10/box.
    Sauter Curved Hydrodissector 27 Gauge

    Product number: SD5099/10

    27 gauge. Tip flattened in vertical plane. Overall length excluding hub: 22mm. 10/box.

    Peribulbar Needle 27 Gauge

    Product number: SD5109/10

    27 Gauge. Packaged sterile. Single-Use. 10/box. Overall Length Excluding Hub: 32 mm.

    I/A Handpiece 45° with sleeve, roughened tip, for 1.8 C-MICS

    Product number: 85795STR

    I/A Handpiece with SurelockTM luer connector for Stellaris®. 45° angled roughened tip with silicone irrigation sleeve. For 1.8mm incision. 0.3mm aspiration port. Packaged single. Sterile. 12/box.
    Slit knife 2.5 mm angled bevel up

    Product number: SUB7550A

    B = 2.5 mm, C = 3.0 mm.
    Menapace Nucleus Divider

    Product number: 55485

    Designed for use exclusively in left hand. Three dimensionally angled tip. Distal end of 2 mm length.
    Irrigation Handpiece 23GA

    Product number: 85958

    Curved shaft. Smooth tip. Two lateral irrigation ports. Outer diameter 0.6 mm (23GA). Limited Reuse 400 times.
    Irrigation Handpiece 22GA

    Product number: 85957

    Curved shaft. Smooth tip. Two lateral irrigation ports. Outer diameter 0.7 mm (22GA). Limited Reuse 400 times.
    Aspiration Handpiece 23GA

    Product number: 85968

    Curved shaft. Roughened tip. 0.3 mm aspiration port. Outer diameter 0.6 mm (23GA). Limited Reuse 400 times.
    Aspiration Handpiece 22GA

    Product number: 85967

    Curved shaft. Roughened tip. 0.3 mm aspiration port. Outer diameter 0.7 mm (22GA). Limited Reuse 400 times.
    Arrow knife 1.1 mm angled

    Product number: LP7592

    A = 1.1 mm.
    Arrow knife 0.8 mm angled

    Product number: LP7593

    A = 0.8 mm.
    Trapezoidal knife 2.85 - 3.2 mm angled

    Product number: LP7582

    A = 2.85 mm, B = 3.2 mm, E = 2.0 mm.
    Trapezoidal knife 2.0 - 2.2 mm angled

    Product number: LP7601

    A = 2.0 mm, B = 2.2 mm, E = 2.29 mm.
    Trapezoidal knife 1.5 - 2.0 mm angled

    Product number: LP7596

    A = 1.5 mm, B = 2.0 mm, E = 2.0 mm.
    Slit knife 3.0 mm angled bevel up

    Product number: LP7556A

    A = 3.0 mm, B = 3.6 mm.
    Slit knife 2.85 mm angled bevel up

    Product number: LP7553A

    A = 2.85 mm, B = 3.5 mm.
    Slit knife 2.75 mm angled bevel up

    Product number: LP7559A

    A = 2.75 mm, B = 3.4 mm.
    Slit knife 2.5 mm angled bevel up

    Product number: LP7550A

    A = 2.5 mm, B = 3.3 mm.
    Slit knife 2.2 mm angled double bevel

    Product number: LP7548ADB

    A = 2.2 mm, B = 2.3 mm.
    Crescent blade bevel up angled

    Product number: LP7510

    B = 2.0 mm, C = 4.0 mm.
    Clear corneal knife angled 2.85 mm

    Product number: LP7528

    A = 2.85 mm, B = 3.2 mm.
    Clear corneal knife 1.6 mm angled

    Product number: LP7527

    A = 2.75 mm, B = 3 mm.
    Clear corneal knife 1.6 mm angled

    Product number: LP7595

    A = 1.6 mm, B = 1.7 mm.
    Stab knife 45 degree

    Product number: SUB7545

    B = 1.9 mm, C = 1.8 mm.
    Stab knife 22.5 degree

    Product number: SUB7522

    B = 1.65 mm, C = 3.7 mm.
    Slit knife 3.2 mm angled bevel up

    Product number: SUB7557A

    B = 3.2 mm, C = 3.9 mm.
    Slit knife 2.85 mm angled double bevel

    Product number: SUB7552ADB

    B = 2.8 mm, C = 3.4 mm
    Slit knife 2.4 mm angled double bevel

    Product number: SUB7549ADB

    B = 2.4 mm, C = 2.9 mm.
    Slit knife 2.2 mm angled double bevel

    Product number: SUB7548ADB

    B = 2.2 mm, C = 2.7 mm.
    Clear corneal knife angled 2.85 mm

    Product number: SUB7528

    B = 2.85 mm, C = 2.8 mm.
    Trapezoidal knife 1.5 mm - 1.7 mm angled

    Product number: SUB7599

    B = 1.7 mm, C = 1.9 mm, D = 1.5 mm, E = 3.0 mm.
    Trapezoidal knife 1.6 mm - 1.8 mm angled

    Product number: SUB7600

    B = 1.8 mm, C = 1.4 mm, D = 1.6 mm, E = 2.6 mm.
    Stab knife 30 degree

    Product number: SUB7530

    B = 1.8 mm, C = 2.9 mm.
    Stab knife 15 degree

    Product number: SUB7515

    B = 1.5 mm, C = 4.9 mm.
    Slit knife 2.85 mm angled bevel up

    Product number: SUB7553A

    B = 2.85 mm, C = 3.4 mm.
    Slit knife 2.75 mm angled bevel up

    Product number: SUB7559A

    B = 2.75 mm, C = 3.3 mm.
    Trapezoidal knife 2.0 - 2.2 mm angled

    Product number: SUB7601

    B = 2.2 mm, C = 1.9 mm, D = 2.0 mm, E = 3.0 mm.
    Trapezoidal knife 1.5 - 2.0 mm angled

    Product number: SUB7596

    B = 2.0 mm, C = 1.6 mm, D = 1.5 mm, E = 2.7 mm.
    I/A Handpiece 20° with Sleeve

    Product number: 85951

    20GA cannula. Tip angled 20° With standard sleeve (D8109). 0.3 mm aspiration port. Limited Reuse 400 times.

    20GA Irrigating Chopper

    Product number: 85903S20

    Single-Use Irrigating Chopper for Micro Incision Cataract Surgery. Sharpened inner side. Atraumatic tip end. Central irrigation port. Outer diameter 0.89mm (20GA). Packaged single. Sterile. 12/box.
    19GA Irrigating Chopper

    Product number: 85903S19

    Single-Use Irrigating Chopper for Micro Incision Cataract Surgery. Sharpened inner side. Atraumatic tip end. Central irrigation port. Outer diameter 1.07mm (19GA). Packaged single. Sterile. 12/box.
    20GA Aspiration handpiece

    Product number: 85901S20

    Curved shaft. Roughened tip. 0.3mm aspiration port. Outer diameter 0.89mm (20GA). Red colour-coded handle. Packaged single. Sterile. 12/box.

    19GA Aspiration handpiece

    Product number: 85901S19

    Curved shaft. Roughened tip. 0.3mm aspiration port. Outer diameter 1.07mm (19GA). Red colour-coded handle. Packaged single. Sterile. 12/box.

    21GA Aspiration handpiece

    Product number: 85900S

    Aspiration tip with lateral port. Roughened tip. Outer diameter 0.8mm (21GA). Red colour-coded handle. Packaged single. Sterile. 12/box.

    Aspiration handpiece 23GA

    Product number: 85792S

    Curved shaft. Roughened tip. 0.3mm aspiration port. Outer diameter 0.6mm (23GA). Red colour-coded handle. Packaged single. Sterile. 12/box.

    Aspiration handpiece 22GA

    Product number: 85790S

    Curved shaft. Roughened tip. 0.3mm aspiration port. Outer diameter 0.7mm (22GA). Red colour-coded handle. Packaged single. Sterile. 12/box.

    Aspiration handpiece 21GA

    Product number: 85780S

    Curved shaft. Roughened tip. 0.3mm aspiration port. Outer diameter 0.8mm (21GA). Red colour-coded handle. Packaged single. Sterile. 12/box.

    Pierse Tying Forceps

    Product number: SUE05-12

    Straight jaws. 0.25 mm notched. 4 mm tying platform. 100 mm overall length. For tissue manipulation and bulbus fixation. Packaged single. Sterile. 12/box

    McPherson Tying Forceps

    Product number: SUE04-12

    Angled jaws. 4 mm tying platform. 8.5 mm jaw length. 98 mm overall length. May be also used for cartridge loading. Packaged single. Sterile. 12/box

    Tying Forceps, straight

    Product number: SUE03-12

    Straight jaws 3.5 mm tying platform. 100 mm overall length. May be used for IOL manipulation and cartridge loading. Packaged single. Sterile. 12/box.

    Bonn Forceps

    Product number: SUE02-12

    Straight jaws. 1x2 teeth 0.12 mm. 3.5 mm tying platform. For tissue manipulation and bulbus fixation. 100 mm overall length. Packaged single. Sterile. 12/box.
    MICS Capsulorhexis Forceps with curved jaws

    Product number: SUE08-12

    Fine angled tips ideal for grasping delicate capsule during MICS 1.8mm procedures. Angled curved shafts allows ease of movement in the anterior chamber. Packaged single. Sterile. 12/box
    Capsulorhexis Forceps with markings

    Product number: SUE07-12

    The forceps shafts with markings at 2.75mm/3.0mm (radius) and 5.5mm/6.0mm (diameter), for determining the diameter for capsulorhexis. Fine angled tips ideal for grasping delicate capsule also during MICS 1.8mm procedures. Angled shafts allows ease of movement in the anterior chamber. Packaged single. Sterile. 12/box.
    MICS Capsulorhexis Forceps

    Product number: SUE06-12

    Fine angled tips ideal for grasping delicate capsule during MICS 1.8mm procedures. Angled shafts allows ease of movement in the anterior chamber. Packaged single. Sterile. 12/box
    Capsulorhexis Forceps

    Product number: SUE01-12

    Angled jaws. 11.5 mm jaw length. fine sharp tips. 100 mm overall length. Packaged single. Sterile. 12/box
    Barraquer Eye Speculum, sterile

    Product number: SUH01

    Sterile single use wire speculum with closed valves. 15mm blade length. Packaged single. Sterile. 24/box.

    Murdoch Eye Speculum

    Product number: E4094

    Fenestrated 14mm blades. Self-locking mechanism. Blade spread: 24mm. Dull finish. Overall length: 57mm.
    Mellinger Eye Speculum

    Product number: E4072

    16 mm blades. 27 mm blade spread. 70 mm
    Lieberman Speculum Angled

    Product number: E4065 A

    Adjustable wire speculum with 17mm open blades. Lid tension adjustable throughout procedure with thumb screw control. Angled 45°. Overall length: 86mm.
    Lieberman Speculum

    Product number: E4065

    Adjustable wire speculum with 17mm open blades. Lid tension adjustable throughout procedure with thumb screw control. Straight shaft. Overall length: 90mm.
    Alfonso Eye Speculum Newborn

    Product number: E4112

    Open 5mm blades. Blade spread: 27mm. Dull finish. Overall length: 45mm.
    Temporal Approach Lid Speculum Wire Blade

    Product number: E4106 T

    Angled for temporal approach. Wire 14mm rounded blades for patient comfort. Blade spread: 18mm. Dull finish. Overall length: 38mm.
    Barraquer Eye Speculum Solid Blade

    Product number: E4106 S

    Solid 14mm blades. Blade spread: 18mm. Dull finish. Overall length: 41mm.
    Temporal Approach Lid Speculum - Open Blade

    Product number: E4106 KT

    Angled for temporal approach. Open 14mm rounded blades for patient comfort. Blade spread: 18mm. Dull finish. Overall length: 41mm.
    Barraquer Eye Speculum

    Product number: 52125Y1

    baby size. 5 mm blades. Blade distance 20 mm. 30 mm
    e4106_k________g1.jpg
    Kratz-Barraquer Eye Speculum

    Product number: 52121K

    14 mm blades. 40 mm. Open valves.
    Barraquer Eye Speculum Adult Heavy Wire

    Product number: 52121H

    14 mm blades. 40 mm. As item 52121 but heavy valves 1.0mm Ø
    Barraquer Eye Speculum

    Product number: 52121

    14 mm blades. Overall length 40 mm
    castroviejo-speculum

    Product number: E4041

    Medium. 16 mm blades. 31 mm blade spread. 82 mm
    castroviejo-speculum

    Product number: E4040

    Small. 15 mm blades. 28 mm blade spread. 75 mm
    Cook Eye Speculum

    Product number: 52201Y3

    for infant. 5 mm blades. Small. 35 mm
    Adjustable Eye Speculum, sterile

    Product number: SUH04

    Sterile singe use adjustable eye speculum with 16mm solid blades. Packaged single. Sterile. 6/box.
    Bangerter Eye Speculum

    Product number: 52250

    55 mm
    Cook Eye Speculum

    Product number: 52203

    Large. 48 mm
    Cook Eye Speculum

    Product number: 52202

    Medium. 38 mm
    Cook Eye Speculum

    Product number: 52201

    9 mm blades. Small. 35 mm
    Mellinger/Beard Eye Speculum

    Product number: 52142

    Child size. 53 mm
    Mellinger/Beard Eye Speculum

    Product number: 52141

    Blade length 12mm. Overall length 68 mm
    Mellinger Eye Speculum

    Product number: 52132

    paediatric. 56 mm
    Mellinger Eye Speculum

    Product number: 52131

    overall length 70 mm
    Pretori Eye Speculum

    Product number: 52112

    Right. 68 mm
    Pretori Eye Speculum

    Product number: 52111

    Left. 68 mm
    Sauer Pediatric Eye Speculum

    Product number: 52070

    Child size. Overall length 30 mm
    Weiss Eye Speculum

    Product number: 52022

    Child size. Left. Solid blades. 67 mm
    Weiss Eye Speculum

    Product number: 52021

    Child size. Right. Solid blades. 67 mm
    Phaco Spatula

    Product number: SUF03

    Angled. 11 mm spatula length. 117 mm overall length. For nucleus manipulation. Packaged single. Sterile. 12/box.
    Johnson Spatula

    Product number: E0730

    Ideal for bimanual phaco procedure. 0.25mm by 10mm long blade. Round knurled handle with polished finish. Overall length: 105mm.
    Koch Phacoemulsification Spatula

    Product number: E0712

    Duckbilled spatula designed to enter a side-port stab incision with tip broad enough to efficiently manipulate the lens nucleus in the anterior chamber. Spatula is useful for rotating and cracking the nucleus. Round knurled handle. Overall length: 117mm.
    Hermeking Spatula

    Product number: 54420

    10 mm tip. Angled 50°. Overall length 108 mm
    Clayman Spatula

    Product number: E0481

    0.5mm x 10mm angled blade with blunt tip. Flat smooth handle with polished finish. Overall length: 128mm.
    Spatula

    Product number: 54270Y4

    Flat-angled. 0.5 x 0.3 mm. 10 mm tip. Overall length 110 mm
    Spatula

    Product number: 54270Y2A

    Flat-angled. 0.15 x 0.3 mm. 10 mm tip. 18 mm shaft. Angled 55°. Overall length 116 mm
    Spatula

    Product number: 54270A

    Flat-angled. 0.15 x 0.5 mm. 7 mm tip. 20 mm shaft. Angled 55°. Overall length 118 mm
    Capsule Spatula

    Product number: 55350

    Delicate. Overall length 120 mm
    Micro Scissors

    Product number: 23160

    Angled up. Overall length 100 mm
    Micro Scissors

    Product number: 23140

    Sharp/sharp. Slightly curved. Length of cut 6 mm. Overall length 105 mm

    Micro Scissors

    Product number: 23130

    Blade length 10mm. Cutting length 8mm. pointed tips. Straight. Overall length 100 mm

    Castroviejo Curved Corneal Scissors

    Product number: 23010

    Blunt tips. 18 mm from mid-screw to tip. Overall length 94 mm

    Wilmer Conjunctival and Utility Scissors

    Product number: E3450

    Angled sharp pointed tips. 18 mm from mid-screw to tip. Overall length 94 mm

    Westcott Conjunctival Scissors

    Product number: E3316

    Lightly curved. Blunt tips. 16 mm from mid-screw to tip. Overall length 132 mm

    Troutman Curved Conjunctival Scissors

    Product number: E3315

    Blunt tips. 17 mm from mid-screw to tip. With lock. Overall length 112 mm

    Angled Capsule Scissors

    Product number: E3390 A

    Delicate 10 mm blades angled 45°. 110 mm

    Gills-Welsh Vannas Micro Scissors

    Product number: E3388 GWL

    Angled. Long model. 11 mm blades with sharp pointed tip. 13 mm from mid-screw to tip. Serrated handle with polished finish. Overall length 86 mm

    Vannas Angled Capsulotomy Scissors

    Product number: E3388

    6mm blades with sharp pointed tips. 9 mm from mid-screw to tip. Serrated handle with polished finish. Overall length 81 mm

    Vannas Curved Capsulotomy Scissors

    Product number: E3387

    6mm blades with sharp pointed tips. 8 mm from mid-screw to tip. Serated handle with polished finish. Overall length 84 mm

    Vannas Straight Capsulotomy Scissors

    Product number: E3386

    Sharp pointed tips. 8 mm from mid-screw to tip. Overall length 84 mm

    Ong Capsule Scissors

    Product number: 25030Y2

    Slightly curved tip. Angled
    Ong Capsule Scissors

    Product number: 25030

    Angled up. 11 mm from mid-screw to tip. 85 mm
    Vannas Capsulotomy Scissors, Curved

    Product number: 24084

    Model Tuebingen. Overall length 85 mm

    Vannas Capsulotomy Scissors, Straight

    Product number: 24083

    Model Tuebingen. Overall length 86 mm
    Vannas Capsulotomy Scissors, Curved

    Product number: 24082

    85 mm
    Vannas Capsulotomy Scissors, Straight

    Product number: 24081

    Overall length 82 mm
    Devgan Universal Cataract Chopper/Multi-Tool

    Product number: ET0703

    This universal cataract instrument is designed to allow multiple functions in one simple and efficient instrument. The chopping tip is designed to provide excellent control of the nucleus with vertical, horizontal or tilt-chop, as well as other techniques. The gently curved and smooth tip, designed to protect the posterior capsule, features grooves intended to engage the optic or haptics for IOL manipulation and for iris push-pull in small pupil cases. A traditional spatula is designed for intraocular manipulation of iris, lens fragments and vitreous. Overall length 137mm.
    Braga-Mele Quick-Chopper

    Product number: E0756

    The slender tip of this instrument provides excellent penetration into the lens. The tip has been blunted to reduce the chance of posterior capsule interference. The instrument is easily rotated under the lens to support and raise quadrants into the tip of the phaco handpiece. The interior of the tip is sharp and is ideal for moderate to dense nuclei. Overall length: 115mm.
    Nagahara Nucleus Chopper Right

    Product number: E0578 R

    Nucleus divider with 1.75mm tip and blade offset at a 60° angle is ideal for performing the “Phaco Chop" technique to be used in right hand. Round knurled handle. Overall length: 114mm.
    Grayson Biaxial Combo Manipulator

    Product number: E0578 L

    Nucleus divider with 1.75mm tip and blade offset at a 60° angle is ideal for performing the “Phaco Chop" technique to be used in left hand. Round knurled handle. Overall length: 114mm.
    Nichamin Double-Ended Nucleus Chopper Spatula

    Product number: E0570 N

    Wedge-shaped chopper designed to allow nucleus chopping in three directions, tip length 1.25mm. Rounded tip highly polished to protect the posterior capsule. 0.5mm spatula end is used to manipulate softer nuclei. Round knurled handle. Overall length: 140mm.
    Haefliger Phaco Cleaver

    Product number: 55306

    left. enlarged surface and cutting edge facilitate the manipulation of the nucleus with less risk of damage to the posterior capsule. 100 mm
    Haefliger Phaco Cleaver

    Product number: 55305

    right. enlarged surface and cutting edge facilitate the manipulation of the nucleus with less risk of damage to the posterior capsule. 100 mm
    Barrett Micro Mushroom Manipulator

    Product number: E4933

    Ideal for nucleus manipulation during phacoemulsification. Also used for manipulating and rotating IOLs within the anterior chamber. Round knurled handle. Overall length: 118mm.
    Koch Stop and Chop Manipulator

    Product number: E0713 G

    angled shaft with 1.5 mm Tip. Designed to efficiently perform the "Stop and Chop" technique. Overall length 112 mm
    Drysdale Nucleus Manipulator

    Product number: E0629

    Flattened paddle tip with generous surface area is ideal for manipulating tissue, rotating, and cracking the nucleus. Round knurled handle. Overall length: 110mm.
    Maloney No-Hole Manipulator

    Product number: E0579

    Teardrop shape tip with post. Round knurled handle with dull finish. Overall length: 124mm.
    Lester Lens Manipulator

    Product number: E0571

    Straight shaft with 0.2mm hourglass shape tip. Round knurled handle with dull finish. Overall length: 115mm.
    Neuhann Nucleus Rotator

    Product number: 55415

    with horizontal "Y-Hook". Overall length 104 m
    Y-shaped Nucleus Rotator

    Product number: SUF06

    With vertical "Y-Hook". Packaged single. Sterile. 12/box.
    Y-shaped Nucleus Rotator

    Product number: SUF05

    With horizontal "Y-Hook". Packaged single. Sterile. 12/box
    Drysdale type Nucleus Manipulator

    Product number: SUF04

    Flattened paddle tip with generous surface area is ideal for manipulating tissue, rotating and cracking the nucleus. Packaged single. Sterile. 12/box.
    Sinskey IOL Hook

    Product number: SUF02

    Angled shaft with 0.5mm tip and 0.18mm diameter. 115 mm overall length. For lens dialing and manipulation. Packaged single. Sterile. 12/box.
    Koch Stop & Chop Manipulator

    Product number: SUF01

    Angled shaft with 1.4 mm tip. 10 mm shaft length. Overall length 116 mm. Designed to efficiently perform the "Stop and Chop" technique. Packaged single. Sterile. 12/box.
    Bechert Nucleus Rotator Titanium

    Product number: ET4937

    Y shape rotator tip. Shaft angled 7mm from tip to bend. Round knurled handle with polished finish. Titanium. Overall length: 124mm.
    Anderson-Barrett Manipulator

    Product number: ET1104

    This manipulator has tapered shafts to help reduce side port leakage. The double-ended instrument has a nucleus chopper at one end combined with a mini Barrett mushroom tip on the opposite end for manipulation of iris, capsule, lens fragments and intraocular lenses. Titanium. Overall length: 130mm.
    Maloney Quick-Chop Chopper

    Product number: ET1103

    This double-ended manipulator was designed to facilitate supracapsular and endocapsular procedures. The manipulator is used in conjunction with the phaco tip to separate the nucleus in a “Quik-Chop" technique developed by Dr. William Maloney. Titanium. Overall length: 130mm.
    Koch Stop and Chop Manipulator Titanium

    Product number: ET0713

    Angled shaft with 1.5mm tip designed to efficiently perform the “Stop and Chop" technique. Round knurled handle. Titanium. Overall length: 112mm.
    Seibel Ambidextrous Chopper

    Product number: E0590

    Olive tip on instrument provides safety for the posterior capsule. Oval shaft behind tip provides efficient chopping of the lens nucleus. Overall length: 117mm.
    Brody Multipurpose Manipulator

    Product number: E0636

    Designed to manipulate and chop lenses during Phacoemulsification. The broad surface facilitates moving lens fragments to the needle while the front and rear notches allow hooking and pushing iris tissue, placement and removal of pupil expansion rings and IOL manipulation. Overall length: 110mm.
    Snapper Lens Chopper

    Product number: E0729

    Designed to gently manipulate the cataract during lens removal. The blunt leading surface is designed to be atraumatic while the inner aspect provides a wedge-shaped chopping edge for efficient dissection of the lens nucleus. Angled shaft offers flexibility and ease of manipulation. Overall length: 112 mm.
    Osher "Y" Hook

    Product number: E0577

    Designed for manipulating one piece lenses. The “Y" hook is excellent for capturing haptics and centering the lens. Straight shaft with “Y" shaped tip. Round knurled handle with dull finish. Overall length: 124mm.
    Fenzl Insertion Hook

    Product number: E0572

    Angled 45°, 10mm shaft with 0.2mm tip. Round knurled handle with dull finish. Overall length: 117mm.
    O'Gawa Lens Dialer

    Product number: E0569

    Excellent for manipulation of the intraocular lens in the capsular bag. The angled and curved shaft allows the instrument to reach across the implant and catch the optic/haptic junction to facilitate dialing the lens. Overall length: 120mm.
    Sinskey Iris and IOL Hook

    Product number: E0545

    0.2mm hook with straight shaft and flat serrated handle. Used to mark the visual axis. Polished finish. Overall length: 118mm.
    Clayman Guide

    Product number: E0542

    0.2mm Sinskey hook with shaft angled 45°. 10mm from tip to bend. Flat smooth handle with polished finish. Overall length: 116mm.
    Kuglen Push Pull Hook

    Product number: 6-400

    Small “H" shaped push-pull tip. Shaft angled 45°, 9mm from tip. Round knurled handle with dull finish. Titanium. Overall length: 122mm.
    Sinskey Hook II Round Handle Titanium

    Product number: 6-250

    0.18mm diameter angled tip, 10mm angled shaft. Used to mark the visual axis. Round knurled handle with dull finish. Titanium. Overall length: 119mm.
    Nucleus Dividing Hook

    Product number: 55483

    This instrument has a 45 ° angle and is designed for chopping and manipulating the nucleus. Overall length is 100 mm
    Nucleus Spatula and Chopper Double Ended

    Product number: 55482

    Double ended instrument: The chopper on one end is designed for chopping the nucleus. The spatula on the other end is used for the manipulation of nucleus and IOL. Overall length is 126 mm
    Iris Hook and Nucleus Chopper Double Ended

    Product number: 55481

    Double-ended instrument: The chopper on one end is designed for chopping the nucleus. The iris hook on the other end is used for the manipulation of tissue, nucleus and IOL. Overall length is 125 mm
    Y-Nucleus Manipulator and Chopper Double Ended

    Product number: 55480

    Double ended instrument: The chopper on one end is designed for chopping the nucleus. The Y manipulator on the other end is used for the manipulation of tissue, nucleus and IOL. Overall length is 122 mm
    Reposition Hook, Model Frankfurt

    Product number: 55300

    0.2 mm hook. 90° angled. Overall length 136 mm
    Lund Iris Hook

    Product number: 54410

    14 mm tip. Angled 45°. Overall length 108 mm

    Dardenne Iris Hook

    Product number: 54290

    rounded. 15 mm tip. Angled 45°. Overall length 115 mm

    Trapezoidal knife 1.8 - 2.2 mm angled

    Product number: LP7603

    A = 1.8 mm, B = 2.2 mm, E = 2.0 mm.
    Trapezoidal knife 1.6 - 1.8 mm angled

    Product number: LP7600

    A = 1.6 mm, B = 1.8 mm, E = 2.0 mm.
    Trapezoidal knife 1.5 - 1.7 mm angled

    Product number: LP7599

    A = 1.5 mm, B = 1.7 mm, E = 2.20 mm.
    Stab knife 45 degree

    Product number: LP7545

    A = 45°, B = 1.8 mm, C = 11.0 mm.
    Stab knife 30 degree

    Product number: LP7530

    A = 30°, B = 1.6 mm, C = 11.0 mm.

    Stab knife 22.5 degree

    Product number: LP7522

    A = 22.5°, B = 1.6 mm, C = 11.0 mm.

    Stab knife 15 degree

    Product number: LP7515

    A = 15°, B = 1.6 mm, C = 11.0 mm.
    Slit knife 3.2 mm angled bevel up

    Product number: LP7557A

    B = 3.2 mm, C = 3.2 mm.
    Slit knife 2.8 mm angled double bevel

    Product number: LP7552ADB

    A = 2.8 mm, B = 3.2 mm.
    Slit knife 2.65 mm angled double bevel

    Product number: LP7551ADB

    A = 2.65 mm, B = 2.8 mm.
    Slit knife 2.65 mm angled bevel up

    Product number: LP7551A

    A = 2.65 mm, B = 3.7 mm.
    Slit knife 2.4 mm angled double bevel

    Product number: LP7549ADB

    A = 2.4 mm, B = 2.5 mm.

    Clear corneal knife 1.3 mm angled

    Product number: LP7594

    A = 1.3 mm, B = 1.4 mm.
    Irrigation handpiece 19GA

    Product number: 85902ST19

    Irrigation handpiece with SurelockTM luer connector for Stellaris®. Curved shaft. Smooth tip. Two lateral irrigation ports of 0.6mm Ø. Outer diameter 1.07mm (19GA). Grey colour-coded handle. Packaged single. Sterile. 12/box.

    Irrigation handpiece 20GA

    Product number: 85902S20

    Curved shaft. Smooth tip. Two lateral irrigation ports of 0.6mm Ø. Outer diameter 0.89mm (20GA). Blue colour-coded handle. Packaged single. Sterile. 12/box.

    Irrigation handpiece 19GA

    Product number: 85902S19

    Curved shaft. Smooth tip. Two lateral irrigation ports of 0.6mm Ø. Outer diameter 1.07mm (19GA). Blue colour-coded handle. Packaged single. Sterile. 12/box.

    Irrigation handpiece 23GA

    Product number: 85807ST

    Irrigation Handpiece with SurelockTM luer connector for Stellaris® System. Curved shaft. Smooth tip. Two lateral irrigation ports. Outer diameter 0.6mm (23GA). Grey colour-coded handle. Packaged single. Sterile. 12/box.

    Irrigation handpiece 23GA

    Product number: 85807S

    Curved shaft. Smooth tip. Two lateral irrigation ports. Outer diameter 0.6mm (23GA). Blue colour-coded handle. Packaged single. Sterile. 12/box.

    Irrigation handpiece 22GA

    Product number: 85806ST

    Irrigation Handpiece with SurelockTM luer connector for Stellaris® System. Curved shaft. Smooth tip. Two lateral irrigation ports. Outer diameter 0.7mm (22GA). Grey colour-coded handle. Packaged single. Sterile. 12/box.
    Irrigation handpiece 22GA

    Product number: 85806S

    Curved shaft. Smooth tip. Two lateral irrigation ports. Outer diameter 0.7mm (22GA). Blue colour-coded handle. Packaged single. Sterile. 12/box.
    Irrigation Handpiece 23GA

    Product number: 85791S

    Curved shaft. Central irrigation port. Outer diameter 0.67mm (23GA). Blue colour-coded handle. Packaged single. Sterile. 12/box.
    Irrigation handpiece 22GA

    Product number: 85789S

    Curved shaft. Central irrigation port. Outer diameter 0.7mm (22GA). Blue colour-coded handle. Packaged single. Sterile. 12/box.
    Irrigation handpiece 21GA

    Product number: 85787ST

    Irrigation Handpiece with SurelockTM luer connector for Stellaris® System. Curved shaft. Smooth tip. Two lateral irrigation ports of 0.6mm Ø. Outer diameter 0.8mm (21GA). Grey colour-coded handle. Packaged single. Sterile. 12/box.
    Irrigation handpiece 21GA

    Product number: 85787S

    Curved shaft. Smooth tip. Two lateral irrigation ports of 0.6mm Ø. Outer diameter 0.8mm (21GA). Blue colour-coded handle. Packaged single. Sterile. 12/box.
    Irrigation Handpiece 21GA

    Product number: 85781S

    Curved shaft. Roughened tip. Two lateral irrigation ports of 0.6mm Ø. Outer diameter 0.8mm (21GA). Blue colour-coded handle. Packaged single. Sterile. 12/box.
    Irrigation Handpiece

    Product number: 85955

    female. Round handle 7 mm Ø. 95 mm
    Irrigation Handpiece 20GA

    Product number: 85805

    Irrigation Handpiece. 20GA. Smooth tip. Two irrigation side ports of 0.6mm. Blue colour-coded handle.
    Irrigation Handpiece 19GA

    Product number: 85803

    Irrigation Handpiece. 19GA. Smooth tip. Two irrigation side ports of 0.6mm. Blue colour-coded handle.
    Irrigation Handpiece 21GA

    Product number: 85779

    slightly curved. 0.5 mm irrigation port. Smooth tip. Outer diameter 0.8mm (21GA)
    Irrigation Handpiece 21GA

    Product number: 85777

    curved. Sandblasted tip. Central irrigation port. outer diameter 0.8mm (21GA)
    Irrigation Handpiece 21GA

    Product number: 85775

    curved. Two 0.5 mm irrigation ports. Tapered tip. Roughened. 21GA (outer diameter 0.8mm)
    Irrigating Chopper 19GA

    Product number: 85809

    Irrigating instrument for divide and conquer technique during biaxial phaco. Two lateral irrigation ports and one posterior facing irrigation port. Outer diameter 1.1mm (19GA).
    Irrigating Chopper 19GA

    Product number: 85800

    Irrigating chopper for bimanual phaco. Tip length 0.95mm. Two irrigation side ports of 0.8mm. Outer diameter 1.1mm (19GA).
    Stellaris® System Zero Phaco Handpiece for Femtocataract 2.2mm

    Product number: SUP06ST

    Designed for aspirating softened nuclei during Femtosecond cataract surgery. The single-use handpiece is designed with an open port aspiration tube with 30° bevel. Recommended for use in a 2.2mm incision. Designed for use with the Stellaris® System. Packaged sterile. Single-Use. 12/box
    Zero Phaco Handpiece for Femtocataract 2.2mm

    Product number: SUP06

    Designed for aspirating softened nuclei during Femtosecond cataract surgery. The single-use handpiece is designed with an open port aspiration tube with 30° bevel. Recommended for use in a 2.2mm incision. Packaged sterile. Single-Use. 12/box
    MICS CapsuleGuard IA® Handpiece 45°

    Product number: 85915ST

    This instrument features a flexible 45 degree tip design for effective cortical removal. Recommended for use in a sub 2.0mm incision. The smooth irrigation and aspiration ports eliminate sharp edges for reduced risk of capsule rupture. The silicone tip design facilitates cortex removal. Capsule polishing. viscoelastic removal in the capsular bag and the semi-transparent silicone sleeve provides visualization. A fully assembled single-use design is provided for safety. Consistency and convenience. Designed for use with the Stellaris® System. Packaged sterile. Single-Use. Overall length 138mm
    MICS CapsuleGuard IA® Handpiece, 45°

    Product number: 85915S

    This instrument features a flexible 45 degree tip design for effective cortical removal. Recommended for use in a sub 2.0mm incision. The smooth irrigation and aspiration ports eliminate sharp edges for reduced risk of capsule rupture. The silicone tip design facilitates cortex removal. Capsule polishing. viscoelastic removal in the capsular bag and the semi-transparent silicone sleeve provides visualization. A fully assembled single-use design is provided for safety. Consistency and convenience. Designed for use with most competitive systems. Pa
    MICS CapsuleGuard IA® Handpiece straight

    Product number: 85914ST

    This instrument features a flexible straight tip design for effective cortical removal. Recommended for use in a sub 2.0mm incision. The smooth irrigation and aspiration ports eliminate sharp edges for reduced risk of capsule rupture. The silicone tip design facilitates cortex removal. Capsule polishing. viscoelastic removal in the capsular bag and the semi-transparent silicone sleeve provides visualization. A fully assembled single-use design is provided for safety. Consistency and convenience. Designed for use with the Stellaris® System. Packaged sterile. Single-Use. 12/box. Overall length 138mm
    MICS CapsuleGuard IA® Handpiece, straight, sterile

    Product number: 85914S

    This instrument features a flexible straight tip design for effective cortical removal. Recommended for use in a sub 2.0mm incision. The smooth irrigation and aspiration ports eliminate sharp edges for reduced risk of capsule rupture. The silicone tip design facilitates cortex removal. Capsule polishing. viscoelastic removal in the capsular bag and the semi-transparent silicone sleeve provides visualization. A fully assembled single-use design is provided for safety. Consistency and convenience. Designed for use with most competitive systems. Packaged sterile. Single-Use. Overall length 138mm
    CapsuleGuard IA® Handpiece curved

    Product number: 85913ST

    This instrument features a flexible curved tip design for effective cortical removal. Recommended for use in a 2.2 - 2.8mm incision. The smooth irrigation and aspiration ports eliminate sharp edges for reduced risk of capsule rupture. The silicone tip design facilitates cortex removal. Capsule polishing. viscoelastic removal in the capsular bag and the semi-transparent silicone sleeve provides superior visualization. A fully assembled single-use design is provided for safety. Consistency and convenience. Designed for use with the Stellaris® System. Packaged sterile. Single-Use. Overall length 137mm
    CapsuleGuard IA® Handpiece curved

    Product number: 85913S

    This instrument features a flexible curved tip design for effective cortical removal. Recommended for use in a 2.2 - 2.8mm incision. The smooth irrigation and aspiration ports eliminate sharp edges for reduced risk of capsule rupture. The silicone tip design facilitates cortex removal. Capsule polishing. viscoelastic removal in the capsular bag and the semi-transparent silicone sleeve provides superior visualization. A fully assembled single-use design is provided for safety. Consistency and convenience. Designed for use with most competitive systems. Packaged sterile. Single-Use. Overall length 137mm
    CapsuleGuard IA® Handpiece straight

    Product number: 85912ST

    This instrument features a flexible straight tip design for effective cortical removal. Recommended for use in a 2.2 - 2.8mm incision. The smooth irrigation and aspiration ports eliminate sharp edges for reduced risk of capsule rupture. The silicone tip design facilitates cortex removal. Capsule polishing. viscoelastic removal in the capsular bag and the semi-transparent silicone sleeve provides superior visualization. A fully assembled single-use design is provided for safety. Consistency and convenience. Designed for use with the Stellaris® System. Packaged sterile. Single-Use. Overall length 137mm
    CapsuleGuard IA® handpiece straight

    Product number: 85912S

    This instrument features a flexible straight tip design for effective cortical removal. Recommended for use in a 2.2 - 2.8mm incision. The smooth irrigation and aspiration ports eliminate sharp edges for reduced risk of capsule rupture. The silicone tip design facilitates cortex removal. Capsule polishing. viscoelastic removal in the capsular bag and the semi-transparent silicone sleeve provides superior visualization. A fully assembled single-use design is provided for safety. Consistency and convenience. Designed for use with most competitive systems. Packaged sterile. Single-Use. Overall length 137mm
    CapsuleGuard IA® Handpiece 45°

    Product number: 85910ST

    This instrument features a flexible 45° tip design for effective cortical removal. Recommended for use in a 2.2 - 2.8mm incision. The smooth irrigation and aspiration ports eliminate sharp edges for reduced risk of capsule rupture. The silicone tip design facilitates cortex removal. Capsule polishing. viscoelastic removal in the capsular bag and the semi-transparent silicone sleeve provides superior visualization. A fully assembled single-use design is provided for safety. Consistency and convenience. Designed with luer-lock design for the Stellaris® System. Packaged sterile. Single-Use. Overall length 137mm
    CapsuleGuard IA® Handpiece 45°

    Product number: 85910S

    This instrument features a flexible 45° tip design for effective cortical removal. Recommended for use in a 2.2 - 2.8mm incision. The smooth irrigation and aspiration ports eliminate sharp edges for reduced risk of capsule rupture. The silicone tip design facilitates cortex removal. Capsule polishing. viscoelastic removal in the capsular bag and the semi-transparent silicone sleeve provides superior visualization. A fully assembled single-use design is provided for safety. Consistency and convenience. Designed for use with most competitive systems. Packaged sterile. Single-Use. Overall length 137mm
    I/A Handpiece 45° with sleeve For 1.8 C-MICS

    Product number: 85795ST

    I/A Handpiece with SurelockTM luer connector for Stellaris®. 45° angled tip with silicone irrigation sleeve. For 1.8mm incision. 0.3mm aspiration port. Packaged single. Sterile. 12/box.
    I/A Handpiece curved with sleeve For 1.8 C-MICS

    Product number: 85794ST

    I/A Handpiece with SurelockTM luer connector for Stellaris®. Curved shaft with silicone irrigation sleeve. For 1.8mm incision. 0.3mm aspiration port. Packaged single. Sterile. 12/box.
    I/A Handpiece tip 90°,16GA

    Product number: 85786ST

    I/A Handpiece with SurelockTM luer connector for Stellaris®. Straight shaft with 90° angled aspiration tip. Ideal for 12 o'clock cortical material removal. 0.3mm aspiration port. Outer diameter 1.65mm (16GA). Packaged single. Sterile. 12/box.
    I/A Handpiece tip 90°,16GA

    Product number: 85786S

    Straight shaft with 90° angled aspiration tip. Ideal for 12 o'clock cortical material removal. 0.3mm aspiration port. Outer diameter 1.65mm (16GA). Packaged single. Sterile. 12/box.
    I/A handpiece straight with sleeve

    Product number: 85785S

    Straight tip with silicone irrigation sleeve for standard phaco incision. Aspiration cannula 0.9mm (20G). 0.3mm aspiration port. Packaged single. Sterile. 12/box.
    I/A Handpiece 45°, 17GA

    Product number: 85784ST

    I/A Handpiece with SurelockTM luer connector for Stellaris®. Straight shaft with 45° angled aspiration tip. 0.3mm aspiration port. Outer diameter 1.5mm (17GA). Packaged single. Sterile. 12/box.
    I/A handpiece tip 45°, 17GA

    Product number: 85784S

    Straight shaft with 45° angled aspiration tip. For optimal 360° cortical material removal. 0.3mm aspiration port. Outer diameter 1.5mm (17GA). Packaged single. Sterile. 12/box.

    I/A Handpiece curved, 17GA

    Product number: 85783ST

    I/A Handpiece with SurelockTM luer connector for Stellaris®. Curved shaft. Ideal for deep-set eyes. 0.3mm aspiration port. Outer diameter 1.5mm (17GA). Packaged single. Sterile. 12/box.

    I/A Handpiece curved, 17GA

    Product number: 85783S

    Curved shaft. Ideal for deep-set eyes. 0.3mm aspiration port. Outer diameter 1.5mm (17GA). Packaged single. Sterile. 12/box.

    I/A handpiece straight, 17GA

    Product number: 85782S

    Straight tip for initial cortical removal. 0.3mm aspiration port. Outer diameter 1.5mm (17GA). Packaged single. Sterile. 12/box.

    SILKO I/A Handpiece, Angled 90º with Sleeve

    Product number: 85771

    20GA cannula. Tip angled 90° With standard sleeve (D8109). 0.3 mm aspiration port. Blue silicone coated handle ensures firm grip. Luer steel connectors. Overall length 138.5 mm

    SILKO I/A Handpiece, Angled 20º with Sleeve

    Product number: 85770

    20GA cannula. Tip angled 20° with standard sleeve. 0.3 mm aspiration port. Blue silicone coated handle ensures firm grip. Luer steel connectors. Overall length 138.5 mm
    SILKO I/A Handpiece, Angled 60º, 17/23GA

    Product number: 85766

    20 mm shaft angled 60° with 17GA outer cannula (coaxial irrigation) and 23GA inner cannula (aspiration). 0.3 mm aspiration port. Blue silicone coated handle ensures firm grip. Luer steel connectors. Overall length 143 mm
    SILKO I/A Handpiece, Angled 60º, 16/22GA

    Product number: 85765

    20 mm shaft angled 60° with 16GA outer cannula (coaxial irrigation) and 22GA inner cannula (aspiration). 0.3 mm aspiration port. Blue silicone coated handle ensures firm grip. Luer steel connectors. Overall length 143 mm
    SILKO I/A Handpiece, Curved, 17/23GA

    Product number: 85764

    19.5 mm shaft with 17GA outer cannula (coaxial irrigation) and 23GA inner cannula (aspiration). 0.3 mm aspiration port. Blue silicone coated handle ensures firm grip. Luer steel connectors. Overall length 142 mm
    SILKO I/A Handpiece, Curved, 16/22GA

    Product number: 85763

    19.5 mm shaft with 16GA outer cannula (coaxial irrigation) and 22GA inner cannula (aspiration). 0.3 mm aspiration port. Blue silicone coated handle ensures firm grip. Luer steel connectors. Overall length 142 mm
    SILKO I/A Handpiece, Straight

    Product number: 85761

    20GA cannula tip. 0.3 mm aspiration port. With standard sleeve (D8109). Blue silicone coated handle ensures firm grip. Luer steel connectors. Overall length 138.5 mm
    Aspiration Handpiece 21GA

    Product number: 85778R

    slightly curved. 0.3 mm aspiration port. Smooth tip. Outer diameter 0.8mm (21GA)
    Aspiration Handpiece 21GA

    Product number: 85776R

    Conical Tip. Roughened. Red colour-coded.
    Aspiration Handpiece 21GA

    Product number: 85774R

    curved. 0.3 mm aspiration port. Tapered tip. Roughened. Outer diameter 0.8mm (21GA)
    SILKO Aspirating Cannula Handpiece

    Product number: 85772R

    red silicone coated handle ensures firm grip. male luer adapter for connection to aspiration line. 95 mm
    Aspiration Handpiece

    Product number: 85950

    male. Round handle 7 mm Ø. 95 mm
    Aspiration Handpiece 20GA

    Product number: 85804

    Conical Tip. Roughened. Red colour-coded.
    Aspiration Handpiece 19GA

    Product number: 85802

    Conical Tip. Roughened. Red colour-coded.
    McPherson Suturing Corneal Forceps

    Product number: E1813 A

    Angled 1 x 2 teeth. 5 mm tying platform. Overall length 85 mm

    Bonn Suturing Forceps

    Product number: E1811 G

    Straight 0.12 mm teeth. 6 mm tying platform. 86 mm

    Bonn Suturing Forceps

    Product number: E1809

    Straight shafts with 0,12 mm teeth. Serrated handle with polised finish. Overall length 74 mm

    Bonn Suturing Forceps 0.12mm Titanium

    Product number: 2-110

    0.12mm 1 x 2 teeth with 6mm platform. Flat serrated handle with dull finish. Titanium. Overall length: 85mm.

    Juenemann IOL Explantation Forceps

    Product number: 65530

    The serrated forceps is designed for explantation of Silicone IOLs without cutting. The serrations of the slim jaws help to securily grasp the IOL inside the capsular bag. Minimum incision size is 2.5mm.

    Osher-Seibel Folding Forceps

    Product number: E2976

    A gently curved forceps designed to easily fold today’s soft intraocular lenses. The serrated handle ensures a firm grip throughout the folding procedure. Overall length: 107mm.

    Doden Implant Forceps

    Product number: 65400

    With perforated handle. 9 mm jaws. Overall length 120 mm

    IOL Grasping Forceps

    Product number: 65245

    Delicate round jaws, angled 50°. Overall length 110 mm

    Pierse Colibri Forceps Micro

    Product number: E1943 22

    Colibri style 0.1mm Pierse tips. Flat open handle with dull finish. Overall length: 78mm.

    Colibri Forceps 0.12mm

    Product number: 2-132

    0.12mm 1 x 2 teeth with 5mm platform and 2mm angled tips. Flat serrated handle, dull finish. Titanium. Overall length: 86mm.

    Troutman-Barraquer Colibri Type Forceps

    Product number: 63038

    Extremely fine. 0.12 mm teeth. Overall length 73 mm

    Colibri Type Forceps

    Product number: 63032

    Extra delicate. 5 mm tying platform. Overall length 77 mm

    Colibri Type Forceps

    Product number: 63031

    5 mm tying platform. Overall length 75 mm

    Draeger Conjunctiva Forceps

    Product number: 62130

    Two pins 0.5 mm. 1.0 mm tip. Overall length 99 mm

    Devgan Micro Capsulorhexis Forceps

    Product number: ET2012

    The ultra-fine tips of this cross action forceps are ideal for small incision procedures, including sub-2 mm coaxial phaco incisions. The mildly sharpened tips are designed to allow the surgeon to puncture the capsule and securely grab the capsule. 2.5 mm and 5.0 mm marks on the shafts are designed as a measuring tool, providing the radius and diameter of the capsulorhexis as it is being created. An iris stop feature is designed to provide the surgeon with excellent grasp of the capsule without engaging the iris. The cross action handle is designed for excellent alignment of the fine tips, reducing wound gape, loss of viscoelastic and AC shallowing. Overall length: 119mm.

    Maloney Capsulorhexis Forcep

    Product number: ET2009

    Forceps with gently curved jaws and ultra fine sharpened tips for puncture and grasping the capsule. Round handle is excellent for precise finger-tip control. Titanium. Overall length: 104mm.

    Lehner-Utrata Capsulorhexis Forceps Round Handle Titanium

    Product number: ET2002 RC

    Utrata-like fine angled tips with gently curved shaft for performing capsulorhexis through tunnel incisions. Dull finish. Round handle manufactured in titanium. Overall length: 112mm.

    Utrata Capsulorhexis Forceps Titanium

    Product number: ET2002

    Fine angled tips ideal for grasping delicate capsule. Angled 12mm shafts with iris stop allows ease of movement in the anterior chamber. Flat handle with dull finish. Titanium. Overall length: 80mm.

    Utrata MICS Capsulorhexis Forceps Titanium

    Product number: ET1202

    Fine angled tips ideal for grasping delicate capsule during 1.8mm MICS™ procedures. Angled 13mm shafts with iris stop allows ease of movement in the anterior chamber. Titanium handle designed after the Stellaris® System handpiece. Overall length: 107mm.

    MICS 1.0mm Capsulorhexis Forceps

    Product number: SUI20-12

    Angled endgripping platforms for grasping delicate capsule. 23G shaft designed for performing capsulorhexis through a 1.0mm incision. Low glare instrument shaft

    Silverstein MICS 1.8mm Capsulorhexis Forceps

    Product number: E2026

    This unique styled forceps are ultra-thin profile, allowing maximum maneuverability through a sub-2.0mm incision, without oar-locking or unnecessary distortion of the wound architecture during capsulorhexis. In addition, the 5.0mm and 6.0mm marks on the anterior blade surface allows the surgeon to create consistent, central capsulorhexis. Overall length: 81mm.

    Utrata Capsulorhexis Forceps Sharp Tips

    Product number: E2002 S

    The popular E2002 Utrata Capsulorhexis Forceps with fine angled sharp tips. Angled 12mm shafts with an iris stop. Flat handle with dull finish. Overall length: 80mm.

    Lehner-Utrata Capsulorhexis Forceps Round Handle

    Product number: E2002 RC

    Utrata-like fine angled tips with gently curved shaft for performing capsulorhexis through tunnel incisions. Dull finish. Round Handle. Overall length: 112mm.

    O'Gawa-Utrata Capsulorhexis Forceps

    Product number: E2002 R

    Fine angled tips with angled 13mm shafts and iris stop. Round handle for fingertip rotational control. Dull finish. Overall length: 112mm.

    Utrata Capsulorhexis Forceps

    Product number: E2002 GE

    Fine angled tips and 12 mm shafts. With iris stop. Overall length 87 mm

    Gimbel Capsulorhexis Forceps

    Product number: E2002 G

    Similar in construction to the E2002 Utrata Capsulorhexis Forceps with jaw set to open only 3mm. Light tension. Flat handle with dull finish. Overall length: 80mm.

    Utrata Capsulorhexis Forceps

    Product number: E2002 F

    delicate. fine angled tips ideal for grasping delicate capsule during 1.8mm MICS procedures. And 12 mm shafts. Overall length 87 mm
    Capsulorhexis Forceps

    Product number: 65050

    Curved. Overall length 102 mm
    Osher Capsule-Foreign Body Forceps

    Product number: E2077

    Fine 3.0mm platform. Platform angled 60° 10mm from angle to tip. Serrated handle with dull finish. Overall length: 80mm.
    Thornton Fine Fixation Ring 13mm

    Product number: ET9020

    Open ring design for globe fixation during various ocular procedures. 13mm in diameter with blunt fixation points. Swivel handle provides increased flexibility. Titanium. Overall length: 107mm.
    Thornton Fine Fixation Ring 16mm

    Product number: ET9019

    Open ring design for globe fixation during various ocular procedures. 16mm in diameter with blunt fixation points. Swivel handle provides increased flexibility. Titanium. Overall length: 108mm.
    Simcoe Reverse I/A Unit

    Product number: E4971 RG

    Reverse version of E4971G. Irrigation through silicone tubing. Aspiration through main hub
    Simcoe Irrigation/Aspiration Unit

    Product number: E4971 G

    23GA. 0.4 mm aspiration port. Irrigation through side opening. 300 mm silicone tubing. 16 mm
    Charleux Irrigation/Aspiration Cannula

    Product number: 85850

    Coaxial shaft. Curved approximately 20°. 18GA outer sleeve with two lateral 0.6 mm irrigation ports. 23GA inner cannula with 0.3 mm aspiration port in bevelled tip 30 cm. Silicone tubing and luer lock connector. 30 mm
    Corneal Irrigator

    Product number: 82020S

    Made of plastic. 33 mm. Packaged single. Sterile. 60/box
    Charleux Irrigating Cannula

    Product number: 85730

    Curved approximately 60°. Bevelled irrigation port. Shaft 11 mm
    Irrigation Cannula Mod. Bonn

    Product number: 85021

    14GA. Shaft 25 mm
    Hydrodissection Cannula 25 Gauge Micro J Shaped

    Product number: SD5003/10

    25 gauge. Hydrodissection/Aspiration Cannula. Round tip, 1.75 mm wide. J-shaped tip allows aspiration and irrigation at the 12 o’clock position. Overall length excluding hub: 22mm. 10/box.
    Silicone Tip Capsule Polisher 27 Gauge

    Product number: SD5005/10

    Silicone cap to provide squeegee effect. Overall length excluding hub: 22mm.
    Cannula, Probe Point, Mod. Hamburg

    Product number: 85110-6

    22GA. Shaft 19 mm . 6/box
    Engels Capsule Polisher

    Product number: 85266

    21GA. 0.3 mm aspiration port. Sandblasted tip
    Brauweiler Aspiration Cannula

    Product number: 85268

    21GA. Shaft 20 mm
    Rycroft Anterior Chamber Cannula 25 Gauge

    Product number: SD1639/10

    25 gauge. 5mm Angled 35°. Packaged sterile. Single-Use. 10/Box. Overall length excluding hub: 22mm.
    Retrobulbar Cannula

    Product number: 87122-6

    Straight. 24GA. Shaft 40 mm. 6/box.
    Peribulbar Needle 25 Gauge

    Product number: SD5108/10

    25 Gauge. 10/box. Overall Length Excluding Hub: 32mm.
    Retrobulbar Needle 25 Gauge

    Product number: SD1637/10

    Atkinson style bevel. 25 Gauge. 10/box. Overall Length Excluding Hub: 38mm.
    Retrobulbar Needle 25 Gauge

    Product number: SD1275/10

    25 Gauge. Packaged sterile. Single-Use. 10/box. Tri-facet style point. Overall Length Excluding Hub: 38mm.
    Castroviejo Caliper

    Product number: E2404

    Caliper measures from 0mm to 20mm in 1mm increments with scale reading on both sides. Thumbscrew holds tips apart at desired setting. Overall length 86 mm.

    Who we are

    Our Instruments

    News

    Service

    Legal

    Links

    © 2025 Bausch & Lomb Incorporated. This site is intended for Healthcare Professionals in EMEA only. All information and materials on this site pertain to the Bausch & Lomb EMEA Region, unless otherwise indicated.