Procedures Archives - Storz Ophthalmic Instuments

Klein Eye Shield, sterile, single-use

Product number: SUA01

Klein Eye Shields are made from white plastic. 75 mm. White. 13 holes of 6 mm Ø. Packaged 24/box.

Viscoelastic Cannula 25 Gauge

Product number: SD2639/10

25 Gauge. Angled 35°, 9mm from tip. Overall length excluding hub: 22mm. Packaged sterile. Single-Use. 10/box.

Helsinki Curved Hydrodissector 27 Gauge

Product number: SD5155/10

27 gauge. Tip flattened in horizontal plane. Overall length excluding hub: 22mm. 10/box.

Sauter Curved Hydrodissector 27 Gauge

Product number: SD5099/10

27 gauge. Tip flattened in vertical plane. Overall length excluding hub: 22mm. 10/box.

Peribulbar Needle 27 Gauge

Product number: SD5109/10

27 Gauge. Packaged sterile. Single-Use. 10/box. Overall Length Excluding Hub: 32 mm.

I/A Handpiece 45° with sleeve, roughened tip, for 1.8 C-MICS

Product number: 85795STR

I/A Handpiece with SurelockTM luer connector for Stellaris®. 45° angled roughened tip with silicone irrigation sleeve. For 1.8mm incision. 0.3mm aspiration port. Packaged single. Sterile. 12/box.

Slit knife 2.5 mm angled bevel up

Product number: SUB7550A

B = 2.5 mm, C = 3.0 mm.

Menapace Nucleus Divider

Product number: 55485

Designed for use exclusively in left hand. Three dimensionally angled tip. Distal end of 2 mm length.

Irrigation Handpiece 23GA

Product number: 85958

Curved shaft. Smooth tip. Two lateral irrigation ports. Outer diameter 0.6 mm (23GA). Limited Reuse 400 times.

Irrigation Handpiece 22GA

Product number: 85957

Curved shaft. Smooth tip. Two lateral irrigation ports. Outer diameter 0.7 mm (22GA). Limited Reuse 400 times.

Aspiration Handpiece 23GA

Product number: 85968

Curved shaft. Roughened tip. 0.3 mm aspiration port. Outer diameter 0.6 mm (23GA). Limited Reuse 400 times.

Aspiration Handpiece 22GA

Product number: 85967

Curved shaft. Roughened tip. 0.3 mm aspiration port. Outer diameter 0.7 mm (22GA). Limited Reuse 400 times.

Arrow knife 1.1 mm angled

Product number: LP7592

A = 1.1 mm.

Arrow knife 0.8 mm angled

Product number: LP7593

A = 0.8 mm.

20 gauge MVR blade

Product number: LP7520

A = 1.2 mm.

19 gauge MVR blade

Product number: LP7519

A = 1.37 mm.

Trapezoidal knife 2.85 - 3.2 mm angled

Product number: LP7582

A = 2.85 mm, B = 3.2 mm, E = 2.0 mm.

Trapezoidal knife 2.0 - 2.2 mm angled

Product number: LP7601

A = 2.0 mm, B = 2.2 mm, E = 2.29 mm.

Trapezoidal knife 1.5 - 2.0 mm angled

Product number: LP7596

A = 1.5 mm, B = 2.0 mm, E = 2.0 mm.

Slit knife 3.0 mm angled bevel up

Product number: LP7556A

A = 3.0 mm, B = 3.6 mm.

Slit knife 2.85 mm angled bevel up

Product number: LP7553A

A = 2.85 mm, B = 3.5 mm.

Slit knife 2.75 mm angled bevel up

Product number: LP7559A

A = 2.75 mm, B = 3.4 mm.

Slit knife 2.5 mm angled bevel up

Product number: LP7550A

A = 2.5 mm, B = 3.3 mm.

Slit knife 2.2 mm angled double bevel

Product number: LP7548ADB

A = 2.2 mm, B = 2.3 mm.

Crescent blade bevel up angled

Product number: LP7510

B = 2.0 mm, C = 4.0 mm.

Clear corneal knife angled 2.85 mm

Product number: LP7528

A = 2.85 mm, B = 3.2 mm.

Clear corneal knife 1.6 mm angled

Product number: LP7527

A = 2.75 mm, B = 3 mm.

Clear corneal knife 1.6 mm angled

Product number: LP7595

A = 1.6 mm, B = 1.7 mm.

Stab knife 45 degree

Product number: SUB7545

B = 1.9 mm, C = 1.8 mm.

Stab knife 22.5 degree

Product number: SUB7522

B = 1.65 mm, C = 3.7 mm.

Slit knife 3.2 mm angled bevel up

Product number: SUB7557A

B = 3.2 mm, C = 3.9 mm.

Slit knife 2.85 mm angled double bevel

Product number: SUB7552ADB

B = 2.8 mm, C = 3.4 mm

Slit knife 2.4 mm angled double bevel

Product number: SUB7549ADB

B = 2.4 mm, C = 2.9 mm.

Slit knife 2.2 mm angled double bevel

Product number: SUB7548ADB

B = 2.2 mm, C = 2.7 mm.

Clear corneal knife angled 2.85 mm

Product number: SUB7528

B = 2.85 mm, C = 2.8 mm.

Trapezoidal knife 1.5 mm - 1.7 mm angled

Product number: SUB7599

B = 1.7 mm, C = 1.9 mm, D = 1.5 mm, E = 3.0 mm.

Trapezoidal knife 1.6 mm - 1.8 mm angled

Product number: SUB7600

B = 1.8 mm, C = 1.4 mm, D = 1.6 mm, E = 2.6 mm.

Stab knife 30 degree

Product number: SUB7530

B = 1.8 mm, C = 2.9 mm.

Stab knife 15 degree

Product number: SUB7515

B = 1.5 mm, C = 4.9 mm.

Slit knife 2.85 mm angled bevel up

Product number: SUB7553A

B = 2.85 mm, C = 3.4 mm.

Slit knife 2.75 mm angled bevel up

Product number: SUB7559A

B = 2.75 mm, C = 3.3 mm.

Trapezoidal knife 2.0 - 2.2 mm angled

Product number: SUB7601

B = 2.2 mm, C = 1.9 mm, D = 2.0 mm, E = 3.0 mm.

Trapezoidal knife 1.5 - 2.0 mm angled

Product number: SUB7596

B = 2.0 mm, C = 1.6 mm, D = 1.5 mm, E = 2.7 mm.

27GA Backflush/Extrusion Handpiece for active & passive aspiration with blunt tip

Product number: SUJ17

27G handpiece with blunt tip, magenta colour coding ring. Delivered with silicone tube with male and female luer connector either for connection to the machine or for connection to the handpiece without use of the machine to facilitate flow outside of immediate surgical field. Male luer slip coupler for connection to machine tubing. Non vented male luer cap, optional for use as backflush handpiece.

27GA Serrated Forceps

Product number: SUI14-12

27G single use serrated vitreoretinal forceps. The jaws of these forceps have serrations inside for non-slip gripping. Designed for peeling and manipulating thicker and more fibrotic membranes. Sterile single use. 12/box.

25GA Serrated Forceps

Product number: SUI12-12

25G single use serrated vitreoretinal forceps. The jaws of these forceps have serrations inside for non-slip gripping. Designed for peeling and manipulating thicker and more fibrotic membranes. Sterile single use. 12/box.

Bipolar Eraser 23GA 2pin tapered

Product number: E7931

Designed for retinal endodiathermy. 23GA shaft. Conical tip. 2-pin connector. Sterile single use. 12/box.

Bipolar Eraser 25GA lemo tapered

Product number: E7926

Designed for retinal endodiathermy. 25GA shaft. Conical tip. Lemosa type connector. Sterile single use. 12/box.

I/A Handpiece 20° with Sleeve

Product number: 85951

20GA cannula. Tip angled 20° With standard sleeve (D8109). 0.3 mm aspiration port. Limited Reuse 400 times.

20GA Irrigating Chopper

Product number: 85903S20

Single-Use Irrigating Chopper for Micro Incision Cataract Surgery. Sharpened inner side. Atraumatic tip end. Central irrigation port. Outer diameter 0.89mm (20GA). Packaged single. Sterile. 12/box.

19GA Irrigating Chopper

Product number: 85903S19

Single-Use Irrigating Chopper for Micro Incision Cataract Surgery. Sharpened inner side. Atraumatic tip end. Central irrigation port. Outer diameter 1.07mm (19GA). Packaged single. Sterile. 12/box.

20GA Aspiration handpiece

Product number: 85901S20

Curved shaft. Roughened tip. 0.3mm aspiration port. Outer diameter 0.89mm (20GA). Red colour-coded handle. Packaged single. Sterile. 12/box.

19GA Aspiration handpiece

Product number: 85901S19

Curved shaft. Roughened tip. 0.3mm aspiration port. Outer diameter 1.07mm (19GA). Red colour-coded handle. Packaged single. Sterile. 12/box.

21GA Aspiration handpiece

Product number: 85900S

Aspiration tip with lateral port. Roughened tip. Outer diameter 0.8mm (21GA). Red colour-coded handle. Packaged single. Sterile. 12/box.

Aspiration handpiece 23GA

Product number: 85792S

Curved shaft. Roughened tip. 0.3mm aspiration port. Outer diameter 0.6mm (23GA). Red colour-coded handle. Packaged single. Sterile. 12/box.

Aspiration handpiece 22GA

Product number: 85790S

Curved shaft. Roughened tip. 0.3mm aspiration port. Outer diameter 0.7mm (22GA). Red colour-coded handle. Packaged single. Sterile. 12/box.

Aspiration handpiece 21GA

Product number: 85780S

Curved shaft. Roughened tip. 0.3mm aspiration port. Outer diameter 0.8mm (21GA). Red colour-coded handle. Packaged single. Sterile. 12/box.

Pierse Tying Forceps

Product number: SUE05-12

Straight jaws. 0.25 mm notched. 4 mm tying platform. 100 mm overall length. For tissue manipulation and bulbus fixation. Packaged single. Sterile. 12/box

McPherson Tying Forceps

Product number: SUE04-12

Angled jaws. 4 mm tying platform. 8.5 mm jaw length. 98 mm overall length. May be also used for cartridge loading. Packaged single. Sterile. 12/box

Tying Forceps, straight

Product number: SUE03-12

Straight jaws 3.5 mm tying platform. 100 mm overall length. May be used for IOL manipulation and cartridge loading. Packaged single. Sterile. 12/box.

23GA Serrated Forceps

Product number: SUI11-12

23G single use serrated vitreoretinal forceps. The jaws of these forceps have serrations inside for non-slip gripping. Designed for peeling and manipulating thicker and more fibrotic membranes. Sterile single use. 12/box.

20GA Serrated Forceps

Product number: SUI10-12

20G single use serrated vitreoretinal forceps. The jaws of these forceps have serrations inside for non-slip gripping. Designed for peeling and manipulating thicker and more fibrotic membranes. Sterile single use. 12/box.

25GA Endgripping ILM Forceps

Product number: SUI08-12

25G single use end gripping vitreoretinal forceps. Specifically designed to remove delicate ILM and epiretinal membrane. Low glare instrument shaft. Sterile single use. 12/box.

20GA Endgripping ILM Forceps

Product number: SUI09-12

20G single use end gripping vitreoretinal forceps. Specifically designed to remove delicate ILM and epiretinal membrane. Low glare instrument shaft. Sterile single use. 12/box.

23GA Endgripping ILM Forceps

Product number: SUI07-12

23G single use end gripping vitreoretinal forceps. Specifically designed to remove delicate ILM and epiretinal membrane. Low glare instrument shaft. Sterile single use. 12/box.

25GA Asymmetric Peeling Forceps

Product number: SUI05-12

Features an asymmetric jaw which allows for excellent visualization of retinal tissue. The sleek, ergonomic handle is consistent with our popular reusable design. Used for ILM, Epiretinal Membrane Peel, macular puckers and cellophane maculopathy. The balanced design provides optimal feel and control. 25 gauge. Packaged sterile. Single-Use. Overall length: 135mm 12/box.

23GA Asymmetric Peeling Forceps

Product number: SUI03-12

27GA Endgripping Forceps

Product number: SUI13-12

27G single use end gripping vitreoretinal forceps. These forceps are used to peel Epiretinal membrane and also ILM. Low glare instrument shaft. Sterile single use. 12/box.

25G Endgripping Forceps

Product number: 65025S-12

25G single use end gripping vitreoretinal forceps. These forceps are used to peel Epiretinal membrane and also ILM. Low glare instrument shaft. Sterile single use. 12/box.

23G Endgripping Forceps

Product number: 65023S-12

23G single use end gripping vitreoretinal forceps. These forceps are used to peel Epiretinal membrane and also ILM. Low glare instrument shaft. Sterile single use. 12/box.

Bonn Forceps

Product number: SUE02-12

Straight jaws. 1x2 teeth 0.12 mm. 3.5 mm tying platform. For tissue manipulation and bulbus fixation. 100 mm overall length. Packaged single. Sterile. 12/box.

MICS Capsulorhexis Forceps with curved jaws

Product number: SUE08-12

Fine angled tips ideal for grasping delicate capsule during MICS 1.8mm procedures. Angled curved shafts allows ease of movement in the anterior chamber. Packaged single. Sterile. 12/box

Capsulorhexis Forceps with markings

Product number: SUE07-12

The forceps shafts with markings at 2.75mm/3.0mm (radius) and 5.5mm/6.0mm (diameter), for determining the diameter for capsulorhexis. Fine angled tips ideal for grasping delicate capsule also during MICS 1.8mm procedures. Angled shafts allows ease of movement in the anterior chamber. Packaged single. Sterile. 12/box.

MICS Capsulorhexis Forceps

Product number: SUE06-12

Fine angled tips ideal for grasping delicate capsule during MICS 1.8mm procedures. Angled shafts allows ease of movement in the anterior chamber. Packaged single. Sterile. 12/box

Capsulorhexis Forceps

Product number: SUE01-12

Angled jaws. 11.5 mm jaw length. fine sharp tips. 100 mm overall length. Packaged single. Sterile. 12/box

Barraquer Eye Speculum, sterile

Product number: SUH01

Sterile single use wire speculum with closed valves. 15mm blade length. Packaged single. Sterile. 24/box.

Murdoch Eye Speculum

Product number: E4094

Fenestrated 14mm blades. Self-locking mechanism. Blade spread: 24mm. Dull finish. Overall length: 57mm.

Mellinger Eye Speculum

Product number: E4072

16 mm blades. 27 mm blade spread. 70 mm

Lieberman Speculum Angled

Product number: E4065 A

Adjustable wire speculum with 17mm open blades. Lid tension adjustable throughout procedure with thumb screw control. Angled 45°. Overall length: 86mm.

Lieberman Speculum

Product number: E4065

Adjustable wire speculum with 17mm open blades. Lid tension adjustable throughout procedure with thumb screw control. Straight shaft. Overall length: 90mm.

Troutman-Castroviejo Corneal Scissors

Product number: E3307

mini model. Curved. Blunt tips. 13 mm from mid-screw to tip. Handle with lock. Overall length 116 mm

Troutman-Castroviejo Corneal Scissors

Product number: E3306

mini model. Curved. Blunt tips. 13 mm from mid-screw to tip. Handle with lock. Overall length 116 mm

Harms-Tubingen Tying Forceps Curved

Product number: E1888 C

Curved shafts and tips with 6.5mm tying platform. Serrated handle with polished finish. Overall length: 101mm.

Shepard Tying Forceps Curved

Product number: E1855 C

Curved shafts and tips with 6mm tying platform. Wide serrated handle with dull finish. Overall length: 108mm

Shepard Tying Forceps Straight

Product number: E1855

Straight shafts with 4mm tying platform. Wide serrated handle with dull finish. Overall length: 108mm.

McPherson Tying Forceps Straight

Product number: E1815 S

Straight shafts with 4mm tying platform. Serrated handle with dull finish. Overall length: 83mm.

Kelman-McPherson Tying Forceps

Product number: E1815 AKG

Angled 45°. 8 mm from tip to bend. 5 mm tying platform. Overall length 84 mm

Bechert-McPherson Tying Forceps

Product number: E1815 ABG

Angled 45°. 10 mm tying platform. Overall length 83 mm

McPherson Tying Forceps Angled

Product number: E1815 A

Angled shafts with 4mm tying platform. Serrated handle with dull finish. Overall length: 82mm.

Osher Tying Forceps Ultra Fine

Product number: E1810

Curved shafts and tips with 6.5mm tying platform. Flat serrated handle with dull finish. Overall length: 100mm.

Osher Tying Forceps

Product number: E1808

Curved shafts and tips with 6.5mm tying platform. Flat serrated handle with dull finish. Overall length: 100mm.

Sheets-McPherson Tying Forceps Angled

Product number: E1807

Angled 45° shafts with 10mm tying platform. 1mm of tip is crisscross serrated. Serrated handle with dull finish. Overall length: 82mm.

O'Gawa Castroviejo Tying Forceps

Product number: E1796 WO

Straight shafts with 5.5mm tying platform. Wide serrated handle with polished finish. Overall length: 108mm.

Tying Forceps Straight Titanium

Product number: 2-500

Straight shafts with 5.5mm tying platform. Flat serrated handle with dull titanium finish. Overall length: 86mm.

Nordan Tying Forceps Curved

Product number: 2-420

Curved shafts with 5.5mm tying platform. Round knurled handle with dull finish. Titanium. Overall length: 110mm.

Pierse Forceps Straight

Product number: 2-100

Straight shafts with 6mm platform and Pierse tips. Flat serrated handle with dull finish. Titanium. Overall length: 85mm.

Tissue Forceps

Product number: E6764

Straight 1 x 2 teeth. Non-magnetic. Overall length 100 mm

Dressing Forceps

Product number: E6760

Straight serrated. 11 mm tips. Non-magnetic. Overall length 100 mm

Böhnke Donor Cornea Holder

Product number: 93100S

The Böhnke Donor Cornea Holder is used for holding the donor cornea during cornea storage in cell culture medium. Packaged single. Sterile. 10/box.

Double Layer Microsurgical Instrument

Product number: E7411

Size 254 x 154 x 49mm. Capacity 20-30 instruments. Double layer sterilisable plastic tray with silicone matting on both layers for supporting and protecting instruments.

Plastic Tray, 100 x 160 mm

Product number: E7409

Sterilisable plastic tray with silicone matting for supporting and protecting instruments. 80 x 160 mm. Dimensions: 10.16 x 16.51 x 2.54 cm. For 4-7 instruments. Overall height 25 mm (incl. floor nobs). Not available in Switzerland and the United Kingdom.

Diamond Knife Sterilising Tray

Product number: E7407

Diamond knife tray with silicone inserts to securely hold the diamond knife. For 2 knives. 6cm wide. 15.87cm length. 2.54cm depth.

Plastic Tray, 150 x 250 mm

Product number: E7406

Sterilisable plastic tray with silicone matting for supporting and protecting instruments. 150 x 250 mm. For 10-20 instruments. Overall height 25 mm (incl. floor nobs)

Bunge Enucleation Spoon

Product number: E3742

8 mm diameter. Overall length 136 mm

Bunge Enucleation Spoon

Product number: E3740

12 mm diameter. Overall length 140 mm

Wells Enucleation Spoon

Product number: E3720

21 mm wide spoon. 5mm by 10mm notch. Overall length 147 mm

Alfonso Eye Speculum Newborn

Product number: E4112

Open 5mm blades. Blade spread: 27mm. Dull finish. Overall length: 45mm.

Temporal Approach Lid Speculum Wire Blade

Product number: E4106 T

Angled for temporal approach. Wire 14mm rounded blades for patient comfort. Blade spread: 18mm. Dull finish. Overall length: 38mm.

Barraquer Eye Speculum Solid Blade

Product number: E4106 S

Solid 14mm blades. Blade spread: 18mm. Dull finish. Overall length: 41mm.

Temporal Approach Lid Speculum - Open Blade

Product number: E4106 KT

Angled for temporal approach. Open 14mm rounded blades for patient comfort. Blade spread: 18mm. Dull finish. Overall length: 41mm.

Barraquer Eye Speculum

Product number: 52125Y1

baby size. 5 mm blades. Blade distance 20 mm. 30 mm

Kratz-Barraquer Eye Speculum

Product number: 52121K

14 mm blades. 40 mm. Open valves.

Barraquer Eye Speculum Adult Heavy Wire

Product number: 52121H

14 mm blades. 40 mm. As item 52121 but heavy valves 1.0mm Ø

Barraquer Eye Speculum

Product number: 52121

14 mm blades. Overall length 40 mm

castroviejo-speculum

Product number: E4041

Medium. 16 mm blades. 31 mm blade spread. 82 mm

castroviejo-speculum

Product number: E4040

Small. 15 mm blades. 28 mm blade spread. 75 mm

Cook Eye Speculum

Product number: 52201Y3

for infant. 5 mm blades. Small. 35 mm

Adjustable Eye Speculum, sterile

Product number: SUH04

Sterile singe use adjustable eye speculum with 16mm solid blades. Packaged single. Sterile. 6/box.

Bangerter Eye Speculum

Product number: 52250

55 mm

Cook Eye Speculum

Product number: 52203

Large. 48 mm

Cook Eye Speculum

Product number: 52202

Medium. 38 mm

Cook Eye Speculum

Product number: 52201

9 mm blades. Small. 35 mm

Mellinger/Beard Eye Speculum

Product number: 52142

Child size. 53 mm

Mellinger/Beard Eye Speculum

Product number: 52141

Blade length 12mm. Overall length 68 mm

Mellinger Eye Speculum

Product number: 52132

paediatric. 56 mm

Mellinger Eye Speculum

Product number: 52131

overall length 70 mm

Pretori Eye Speculum

Product number: 52112

Right. 68 mm

Pretori Eye Speculum

Product number: 52111

Left. 68 mm

Sauer Pediatric Eye Speculum

Product number: 52070

Child size. Overall length 30 mm

Weiss Eye Speculum

Product number: 52022

Child size. Left. Solid blades. 67 mm

Weiss Eye Speculum

Product number: 52021

Child size. Right. Solid blades. 67 mm

aspiration specula tubing extension

Product number: 93012

for use with aspirating speculum Art. Nos. 52135. Silicone tube 2m. With male and female luer connector.

Spare Tubing For LASIK Specula

Product number: 93011

460 mm bifurcated silicone tubing. male luer-lock connector. Can be used for specula 52135. E4061. E4061 H. E4067. And E4119

Phaco Spatula

Product number: SUF03

Angled. 11 mm spatula length. 117 mm overall length. For nucleus manipulation. Packaged single. Sterile. 12/box.

Johnson Spatula

Product number: E0730

Ideal for bimanual phaco procedure. 0.25mm by 10mm long blade. Round knurled handle with polished finish. Overall length: 105mm.

Koch Phacoemulsification Spatula

Product number: E0712

Duckbilled spatula designed to enter a side-port stab incision with tip broad enough to efficiently manipulate the lens nucleus in the anterior chamber. Spatula is useful for rotating and cracking the nucleus. Round knurled handle. Overall length: 117mm.

Hermeking Spatula

Product number: 54420

10 mm tip. Angled 50°. Overall length 108 mm

Kohnen-Koch II LASIK combined instrument

Product number: 53013T

Double ended instrument designed for easy entrance into the interface in case of retreatment. Sharpened edge. 0.7mm length and sharp spatula for dissection of previous flap. Titanium.

Spatula LASIK Kohnen

Product number: 53004T

for flap manipulation in case of retreatment. Tapered tip spatula facilitates easy separation of corneal tissues. 10mm angle from tip to bend. Titanium.

Flap Lifter LASIK Kohnen

Product number: 53003T

Designed for easy entrance into the interface in case of retreatment. Sharpened edge. 0.7mm length. Titanium.

Hoe Epithelium LASEK

Product number: 53011T

Epithelial hoe with rounded edges and semi sharp sides is used to manipulate detached surface epithelium.

Spatula Epithelium LASEK

Product number: 53010T

Hockey knife shaped spatula with sharp anterior part to detach epithelium at the incision of the trephine.

Clayman Spatula

Product number: E0481

0.5mm x 10mm angled blade with blunt tip. Flat smooth handle with polished finish. Overall length: 128mm.

Spatula

Product number: 54270Y4

Flat-angled. 0.5 x 0.3 mm. 10 mm tip. Overall length 110 mm

Spatula

Product number: 54270Y2A

Flat-angled. 0.15 x 0.3 mm. 10 mm tip. 18 mm shaft. Angled 55°. Overall length 116 mm

Spatula

Product number: 54270A

Flat-angled. 0.15 x 0.5 mm. 7 mm tip. 20 mm shaft. Angled 55°. Overall length 118 mm

Terry Scraper Non-Irrigating

Product number: E3124

Used to gently roughen the inner stromal surface of the cornea in preparation for the graft in the DSEK procedure. Overall length: 115mm.

Fogla Trifacet Spatula

Product number: E0479

The trifacet design of this instrument, with its blunt tip, permits safe introduction into the space between Descemet’s membrane and the corneal stroma following the formation of the “big bubble" in DALK. The anterior stroma can then be safely incised over the sharp edge of the spatula in order to enlarge the opening without damaging Descemet’s membrane. Overall length: 121mm.

Capsule Spatula

Product number: 55350

Delicate. Overall length 120 mm

Schocket Double Ended Scleral Depressor

Product number: E5108

Double-end depressor and marker. Rounded end designed for depressing sclera and curved marking end for reaching behind the globe. 6mm wide bar and 2.5mm teardrop shape tips. Overall length: 134mm.

Flynn Scleral Depressor

Product number: E5107

Lens loop style tip excellent for depressing pediatric sclera. Flat serrated handle. Polished finish. Overall length: 80mm.

Kreissig Localizer

Product number: 56210A

double-ended. 2,4 mm diameter conical tip. Slightly curved 32 mm shaft. 6.5 mm wide bar tip. Strongly curved 35 mm shaft. pocket clip. Overall length 135 mm

Laqua Scleral Depressor

Product number: 56201A

double-ended. 4 mm teardrop-shaped end with 34 mm shaft and 2 mm trephine-like blunt end with 33 mm shaft. pocket clip. Overall length 136 mm

Stevens Curved Tenotomy Scissors

Product number: E3562

blunt tips. Overall length 112 mm

Stevens Straight Tenotomy Scissors

Product number: E3560

blunt tips. Overall length 112 mm

Stevens Curved Tenotomy Scissors

Product number: E3556 I

light model. Blunt tips. 19 mm from mid-screw to tip. Overall length 98 mm

Stevens Straight Tenotomy Scissors

Product number: E3554 I

light model. Blunt tips. 19 mm from mid-screw to tip. Overall length 98 mm

Westcott Curved Tenotomy Scissors

Product number: E3320 RX

right. Sub-mini model. Blunt tips. 9 mm from mid-screw to tip. Overall length 88 mm

Shepard-Westcott Tenotomy Scissors

Product number: E3320 RS

right. Blunt tips. Curved. 21 mm from mid-screw to tip. Overall length 123 mm

Westcott Curved Tenotomy Scissors

Product number: E3320 R

right. Blunt tips. 19 mm from mid-screw to tip. Overall length 115 mm

Westcott Curved Tenotomy Scissors

Product number: E3320 L

left. Blunt tips. 19 mm from mid-screw to tip. Overall length 115 mm

Westcott Micro Tenotomy Scissors

Product number: 27100

blunt/Blunt. Overall length 99 mm

Stevens Tenotomy Scissors

Product number: 27082

long. Curved. Overall length 110 mm

Westcott Tenotomy Scissors

Product number: 27062

right. Sharp pointed/sharp pointed. Overall length 110 mm

Westcott Tenotomy Scissors

Product number: 27060

right. Blunt/blunt. Slightly curved. Overall length 110 mm

Stevens Tenotomy Scissors

Product number: 27012

short. Curved. Overall length 103 mm

Knapp Curved Strabismus Scissors

Product number: E3578

Blunt tips. Strongly Curved. 25 mm from mid-screw to tip. Overall length 118 mm

Knapp Curved Strabismus Scissors

Product number: E3577

Blunt tips. Lightly Curved. 25 mm from mid-screw to tip. Overall length 118 mm

Curved Strabismus Scissors

Product number: E3572 I

Blunt tips. Strongly Curved. 27 mm from mid-screw to tip. Overall length 106 mm

Curved Strabismus Scissors

Product number: E3571 I

Blunt tips. 29 mm from mid-screw to tip. Overall length 109 mm

Straight Strabismus Scissors

Product number: E3570 I

Blunt tips. 29 mm from mid-screw to tip. Overall length 109 mm

Strabismus Scissors, Mod. Bonn

Product number: 27070

Curved. Overall length 88 mm

Strabismus Scissors

Product number: 27052

Long blades. Curved. Overall length 103 mm

Strabismus Scissors

Product number: 27051

Long blades. Straight. Blunt tips. Overall length 103 mm

Strabismus Scissors

Product number: 27041

Short blades. Straight. Blunt tips. Overall length 110 mm

Littler Curved Dissecting Scissors

Product number: E3580

light curved. Blunt tips. eyes in blades used for drawing sutures or muscle through a tunnel dissection. 27 mm from mid-screw to tip. Overall length 119 mm

Angled Eye Scissors

Product number: E3436

blunt probe-point tips. Angled. 26 mm from mid-screw to tip. Overall length 116 mm

Curved Eye Scissors

Product number: E3426

pointed tips. 32 mm from mid-screw to tip. Overall length 109 mm

Straight Eye Scissors

Product number: E3424

pointed tips. 32 mm from mid-screw to tip. Overall length 109 mm

Curved Eye Scissors

Product number: E3412 I

pointed tips. 29 mm from mid-screw to tip. Overall length 109 mm

Straight Eye Scissors

Product number: E3410 I

pointed tips. 29 mm from mid-screw to tip. Overall length 109 mm

ClaymanTM-Vannas Straight Scissors

Product number: E3383 S

sharp pointed tips. 7 mm from mid-screw to tip. Overall length 83 mm

ClaymanTM-Vannas Curved Scissors

Product number: E3383 C

sharp pointed tips. 7 mm from mid-screw to tip. Overall length 83 mm

Westcott Type Utility Scissors

Product number: E3322

rounded sharp tips. 25 mm from mid-screw to tip. Overall length 131 mm

ClaymanTM-Westcott Curved Scissors

Product number: E3243

blunt tips. 11 mm from mid-screw to tip. Overall length 107 mm

Eye Scissors

Product number: 24050

curved. Overall length 90 mm

Eye Scissors, curved

Product number: 24020

curved. Overall length 89 mm

Bonn Eye Scissors

Product number: 23060

curved. Overall length 89 mm

STORZ Stitch Scissors Fine Straight

Product number: E3340

Sharp pointed tips. 17mm from mid-screw to tip. Flat serrated handle with polished finish. Overall length: 112mm.

Westcott Type Stitch Scissors

Product number: E3321

sharp pointed tips. 21 mm from mid-screw to tip. Overall length 120 mm

Curved Iris Scissors

Product number: E3408

sharp pointed tips. 28 mm from mid-screw to tip. Overall length 100 mm

Curved Iris Scissors

Product number: E3405

sharp pointed tips. 28 mm from mid-screw to tip. Overall length 100 mm

Straight Iris Scissors

Product number: E3404

sharp pointed tips. 28 mm from mid-screw to tip. Overall length 100 mm

Barraquer Iris Scissors

Product number: E3366

blunt/blunt. 8 mm from bend to tip. Overall length 54 mm

Cohan-Vannas Curved Iris Scissors

Product number: E3349

sharp pointed tips. 12 mm from mid-screw to tip. Overall length 57 mm

McPherson-Vannas Curved Iris Scissors

Product number: E3347

sharp pointed tips. 11 mm from mid-screw to tip. Overall length 83 mm

Curved Iris Scissors

Product number: E3344

sharp pointed tips. 21 mm from mid-screw to tip. Overall length 121 mm

Straight Iris Scissors

Product number: E3343

sharp pointed tips. 21 mm from mid-screw to tip. Overall length 121 mm

Noyes Iris Scissors

Product number: 24071

blunt/blunt. Overall length 113 mm

Curved Enucleation Scissors

Product number: E3652

heavy rounded blades. Blunt tips. 44 mm from mid-screw to tip. Overall length 130 mm

Curved Enucleation Scissors

Product number: E3651

medium rounded blades. Blunt tips. 44 mm from mid-screw to tip. Overall length 135 mm

Aebli Corneal Scissors

Product number: E3490

Straight. Blunt tips. Overall length 92 mm

Castroviejo Keratoplasty-Utility-Stitch Scissors

Product number: E3321 MWH

very small pointed tips. 13 mm from mid-screw to tip. Overall length 131 mm

Castroviejo Corneal Section Scissors

Product number: E3305 M

Left. mid-mini. Curved. Blunt tips. Lower blade 0.5 mm longer. 13 mm from mid-screw to tip. 106 mm

Castroviejo Corneal Section Scissors

Product number: E3305

Left. Angled. Blunt tips. Curved blades. Lower blade 0.5 mm long. 14 mm from mid-screw to tip. Overall length 106 mm

Castroviejo Corneal Section Scissors

Product number: E3304 M

Right. Curved. Blunt tips. Lower blade 0.5 mm longer. 13 mm from mid-screw to tip. Overall length 106 mm

Castroviejo Corneal Section Scissors

Product number: E3304

Right. Angled. Blunt tips. Curved blades. Lower blade 0.5 mm long. 14 mm from mid-screw to tip. Overall length 106 mm

Castroviejo Corneal Section Scissors

Product number: E3301

Left. Angled. Blunt tips. Curved blades. Lower blade 1 mm longer and rounded spatula-like to minimise trauma. 18 mm from mid-screw to tip. Overall length 110 mm

Castroviejo Corneal Section Scissors

Product number: E3300

Right. Angled. Blunt tips. Curved blades. Lower blade 1 mm longer and rounded spatula-like to minimise trauma. 18 mm from mid-screw to tip. Overall length 110 mm

Katzin Corneal Transplant Scissors

Product number: E3233

right. miniature model. Strongly curved. Blunt tips. Lower blade 12 mm. upper blade 11 mm (from mid-screw to tip). Overall length 108 mm

STORZ Corneal Forceps Colibri Style

Product number: E3232

left. miniature model. Strongly curved. Blunt tips. Lower blade 12 mm. upper blade 11 mm (from mid-screw to tip). Overall length 108 mm

Mini Corneal Scissors, Right

Product number: E3231 R

Delicate. For completion of trepanations. Lower blade 0.5m longer. 9 mm from mid-screw to tip. Overall length 100 mm

Mini Corneal Scissors, Left

Product number: E3231 L

Delicate. For completion of trepanations. Lower blade 0.5m longer. 9 mm from mid-screw to tip. Overall length 100 mm

Castroviejo Angled Corneal Scissors

Product number: E3223

Universal mini model. Blunt tips. 19 mm from mid-screw to tip. Overall length 106 mm

Castroviejo Corneal Scissors

Product number: E3222 R

Right orientation. knee angle. Blunt tips. 16 mm from mid-screw to tip. Overall length 106 mm

Castroviejo Keratoplasty Scissors

Product number: E3221

angled. Blunt tips. Lower blade 1 mm longer. 16 mm from mid-screw to tip. Overall length 110 mm

Castroviejo Curved Corneal Scissors

Product number: E3220

Blunt tips. 16 mm from mid-screw to tip. Overall length 115 mm

Castroviejo Corneal Scissors, Right

Product number: E3218 R

Mini. Curved. Blunt tips. 11 mm from mid-screw to tip. Overall length 106 mm

Castroviejo Mini Corneal Scissors

Product number: E3218 MM

Universal. Blunt tips. 11 mm from mid-screw to tip. Overall length 106 mm

Castroviejo Corneal Scissors, Left

Product number: E3218 L

Mini. Curved. Blunt tips. 11 mm from mid-screw to tip. Overall length 106 mm

Fogla Scissors Right

Product number: E3217 R

This scissor is used to remove the residual corneal stroma separated from the Descemet’s membrane in DALK surgery. The lower blade of the scissors is thinner and 1mm longer than the upper blade which displaces Descemet’s membrane. Protecting it from being damaged by the blades. Right. Overall length 107mm

Fogla Scissors Left

Product number: E3217 L

These scissors are used to remove the residual corneal stroma separated from the Descemet’s membrane in DALK surgery. The lower blade of the scissors is thinner and 1mm longer than the upper blade which displaces Descemet’s membrane. Protecting it from being damaged by the blades. Left. Overall length 107mm

Katzin Corneal Transplant Scissors

Product number: 23202

Left. Overall length 98 mm

Katzin Corneal Transplant Scissors

Product number: 23201

Right. Overall length 98 mm

Micro Scissors

Product number: 23160

Angled up. Overall length 100 mm

Micro Scissors

Product number: 23140

Sharp/sharp. Slightly curved. Length of cut 6 mm. Overall length 105 mm

Micro Scissors

Product number: 23130

Blade length 10mm. Cutting length 8mm. pointed tips. Straight. Overall length 100 mm

Castroviejo Curved Corneal Scissors

Product number: 23010

Blunt tips. 18 mm from mid-screw to tip. Overall length 94 mm

Wilmer Conjunctival and Utility Scissors

Product number: E3450

Angled sharp pointed tips. 18 mm from mid-screw to tip. Overall length 94 mm

Westcott Conjunctival Scissors

Product number: E3316

Lightly curved. Blunt tips. 16 mm from mid-screw to tip. Overall length 132 mm

Troutman Curved Conjunctival Scissors

Product number: E3315

Blunt tips. 17 mm from mid-screw to tip. With lock. Overall length 112 mm

Angled Capsule Scissors

Product number: E3390 A

Delicate 10 mm blades angled 45°. 110 mm

Gills-Welsh Vannas Micro Scissors

Product number: E3388 GWL

Angled. Long model. 11 mm blades with sharp pointed tip. 13 mm from mid-screw to tip. Serrated handle with polished finish. Overall length 86 mm

Vannas Angled Capsulotomy Scissors

Product number: E3388

6mm blades with sharp pointed tips. 9 mm from mid-screw to tip. Serrated handle with polished finish. Overall length 81 mm

Vannas Curved Capsulotomy Scissors

Product number: E3387

6mm blades with sharp pointed tips. 8 mm from mid-screw to tip. Serated handle with polished finish. Overall length 84 mm

Vannas Straight Capsulotomy Scissors

Product number: E3386

Sharp pointed tips. 8 mm from mid-screw to tip. Overall length 84 mm

Ong Capsule Scissors

Product number: 25030Y2

Slightly curved tip. Angled

Ong Capsule Scissors

Product number: 25030

Angled up. 11 mm from mid-screw to tip. 85 mm

Vannas Capsulotomy Scissors, Curved

Product number: 24084

Model Tuebingen. Overall length 85 mm

Vannas Capsulotomy Scissors, Straight

Product number: 24083

Model Tuebingen. Overall length 86 mm

Vannas Capsulotomy Scissors, Curved

Product number: 24082

85 mm

Vannas Capsulotomy Scissors, Straight

Product number: 24081

Overall length 82 mm

Castroviejo Needle Holder

Product number: E3876

Heavy 13 mm serrated straight jaws with grooves. Ring handle with ratchet lock. Overall length 130 mm

Castroviejo Needle Holder

Product number: E3864

Heavy 16 mm straight jaws. With lock. Overall length 149 mm

Castroviejo Needle Holder

Product number: E3861 WHMC

Fine 9 mm curved jaws. With lock. Overall length 130 mm

Castroviejo Needle Holder

Product number: E3852

Medium 9 mm tungsten carbide inlaid straight jaws. With lock. Overall length 148 mm

Castroviejo Needle Holder

Product number: E3850

Heavy 12 mm straight jaws. With lock. Overall length 138 mm

Castroviejo Needle Holder

Product number: E3849

Medium 11 mm Gently curved jaws. Without lock. Overall length 137 mm

Barraquer Needle Holder

Product number: E3848

Medium 11 mm Gently curved jaws. With lock. Overall length 137 mm

Barraquer Needle Holder

Product number: E3844

Fine 10 mm Gently curved jaws. Medium size handle. Without lock. Overall length 135 mm

Barraquer Needle Holder

Product number: E3843

Fine 10 mm moderately curved jaws. Large handle. With lock. Overall length 137 mm

Barraquer Needle Holder

Product number: E3842

Fine 10 mm moderately curved jaws. Large handle. Without lock. Overall length 137 mm

Cohan Needle Holder

Product number: E3836 CW

Fine 8 mm Gently curved jaws. With lock. Overall length 104 mm

Cohan Needle Holder

Product number: E3836 C

Fine 8 mm Gently curved jaws. Without lock. Overall length 104 mm

Barraquer Needle Holder

Product number: E3828 SWO

Delicate 9 mm straight jaws. Without lock. Overall length 134 mm

Barraquer Needle Holder

Product number: E3828 SW

Delicate 9 mm straight jaws. With lock. Overall length 134 mm

Barraquer Needle Holder

Product number: E3828 CWO

Delicate 9 mm Gently curved jaws. Without lock. Overall length 133 mm

Barraquer Needle Holder

Product number: E3828 CW

Delicate 9 mm Gently curved jaws. With lock. overall length 133 mm

Osher Needle Holder

Product number: E3807 WO

Delicate curved and tapered 9 mm jaws for grasping fine 10-0 sutures. Without lock. Overall length 110 mm

Barraquer Needle Holder

Product number: 73111

Fine 10 mm Gently curved jaws. Inner surfaces roughened. Handle with lengthwise slots and screwed end-joint. Without lock. Overall length 125 mm

Barraquer Needle Holder

Product number: 73050

9 mm Gently curved jaws. Without lock. Overall length 116 mm

Barraquer Needle Holder

Product number: 73030

Fine 9 mm straight jaws. Without lock. Overall length 136 mm

Barraquer Needle Holder

Product number: 73022

Fine 9 mm Gently curved jaws. With lock. Overall length 134 mm

Barraquer Needle Holder

Product number: 73021

Fine 9 mm Gently curved jaws. Without lock. Overall length 134 mm

Castroviejo Needle Holder

Product number: 72054

8 mm curved jaws. With lock. Overall length 142 mm

Castroviejo Needle Holder

Product number: 72053

8 mm curved jaws. Without lock. Overall length 142 mm

Castroviejo Needle Holder

Product number: 72051

8 mm straight jaws. Without lock. Overall length142 mm

Stevens Curved Tenotomy Hook

Product number: E0600

6mm curved hook. Flat serrated handle with polished finish. Overall length: 119mm.

Strabismus Hook, Model Essen

Product number: 57440A

Hook 7mm, paediatric. Overall length 145 mm.

Strabismus Hook, Model Hamburg

Product number: 57260A

Hook 11 mm. Overall length 140 mm

Strabismus Hook

Product number: 57200A

Hook 7.5mm with bulbous tip. Extra delicate. Overall length 145 mm.

Strabismus Hook, Model Bonn

Product number: 57190A

Hook 10mm. Flat serrated handle. Overall length 148 mm

25G Membrane Pick 130°, sterile, 8/box

Product number: SUK02

25G Shaft with non-glare finish. 130° angled tip. Sterile single use. 8/box.

Devgan Universal Cataract Chopper/Multi-Tool

Product number: ET0703

This universal cataract instrument is designed to allow multiple functions in one simple and efficient instrument. The chopping tip is designed to provide excellent control of the nucleus with vertical, horizontal or tilt-chop, as well as other techniques. The gently curved and smooth tip, designed to protect the posterior capsule, features grooves intended to engage the optic or haptics for IOL manipulation and for iris push-pull in small pupil cases. A traditional spatula is designed for intraocular manipulation of iris, lens fragments and vitreous. Overall length 137mm.

Braga-Mele Quick-Chopper

Product number: E0756

The slender tip of this instrument provides excellent penetration into the lens. The tip has been blunted to reduce the chance of posterior capsule interference. The instrument is easily rotated under the lens to support and raise quadrants into the tip of the phaco handpiece. The interior of the tip is sharp and is ideal for moderate to dense nuclei. Overall length: 115mm.

Nagahara Nucleus Chopper Right

Product number: E0578 R

Nucleus divider with 1.75mm tip and blade offset at a 60° angle is ideal for performing the “Phaco Chop" technique to be used in right hand. Round knurled handle. Overall length: 114mm.

Grayson Biaxial Combo Manipulator

Product number: E0578 L

Nucleus divider with 1.75mm tip and blade offset at a 60° angle is ideal for performing the “Phaco Chop" technique to be used in left hand. Round knurled handle. Overall length: 114mm.

Nichamin Double-Ended Nucleus Chopper Spatula

Product number: E0570 N

Wedge-shaped chopper designed to allow nucleus chopping in three directions, tip length 1.25mm. Rounded tip highly polished to protect the posterior capsule. 0.5mm spatula end is used to manipulate softer nuclei. Round knurled handle. Overall length: 140mm.

Haefliger Phaco Cleaver

Product number: 55306

left. enlarged surface and cutting edge facilitate the manipulation of the nucleus with less risk of damage to the posterior capsule. 100 mm

Haefliger Phaco Cleaver

Product number: 55305

right. enlarged surface and cutting edge facilitate the manipulation of the nucleus with less risk of damage to the posterior capsule. 100 mm

Barrett Micro Mushroom Manipulator

Product number: E4933

Ideal for nucleus manipulation during phacoemulsification. Also used for manipulating and rotating IOLs within the anterior chamber. Round knurled handle. Overall length: 118mm.

Koch Stop and Chop Manipulator

Product number: E0713 G

angled shaft with 1.5 mm Tip. Designed to efficiently perform the "Stop and Chop" technique. Overall length 112 mm

Drysdale Nucleus Manipulator

Product number: E0629

Flattened paddle tip with generous surface area is ideal for manipulating tissue, rotating, and cracking the nucleus. Round knurled handle. Overall length: 110mm.

Maloney No-Hole Manipulator

Product number: E0579

Teardrop shape tip with post. Round knurled handle with dull finish. Overall length: 124mm.

Lester Lens Manipulator

Product number: E0571

Straight shaft with 0.2mm hourglass shape tip. Round knurled handle with dull finish. Overall length: 115mm.

Neuhann Nucleus Rotator

Product number: 55415

with horizontal "Y-Hook". Overall length 104 m

Y-shaped Nucleus Rotator

Product number: SUF06

With vertical "Y-Hook". Packaged single. Sterile. 12/box.

Y-shaped Nucleus Rotator

Product number: SUF05

With horizontal "Y-Hook". Packaged single. Sterile. 12/box

Drysdale type Nucleus Manipulator

Product number: SUF04

Flattened paddle tip with generous surface area is ideal for manipulating tissue, rotating and cracking the nucleus. Packaged single. Sterile. 12/box.

Sinskey IOL Hook

Product number: SUF02

Angled shaft with 0.5mm tip and 0.18mm diameter. 115 mm overall length. For lens dialing and manipulation. Packaged single. Sterile. 12/box.

Koch Stop & Chop Manipulator

Product number: SUF01

Angled shaft with 1.4 mm tip. 10 mm shaft length. Overall length 116 mm. Designed to efficiently perform the "Stop and Chop" technique. Packaged single. Sterile. 12/box.

Bechert Nucleus Rotator Titanium

Product number: ET4937

Y shape rotator tip. Shaft angled 7mm from tip to bend. Round knurled handle with polished finish. Titanium. Overall length: 124mm.

Anderson-Barrett Manipulator

Product number: ET1104

This manipulator has tapered shafts to help reduce side port leakage. The double-ended instrument has a nucleus chopper at one end combined with a mini Barrett mushroom tip on the opposite end for manipulation of iris, capsule, lens fragments and intraocular lenses. Titanium. Overall length: 130mm.

Maloney Quick-Chop Chopper

Product number: ET1103

This double-ended manipulator was designed to facilitate supracapsular and endocapsular procedures. The manipulator is used in conjunction with the phaco tip to separate the nucleus in a “Quik-Chop" technique developed by Dr. William Maloney. Titanium. Overall length: 130mm.

Koch Stop and Chop Manipulator Titanium

Product number: ET0713

Angled shaft with 1.5mm tip designed to efficiently perform the “Stop and Chop" technique. Round knurled handle. Titanium. Overall length: 112mm.

Seibel Ambidextrous Chopper

Product number: E0590

Olive tip on instrument provides safety for the posterior capsule. Oval shaft behind tip provides efficient chopping of the lens nucleus. Overall length: 117mm.

Brody Multipurpose Manipulator

Product number: E0636

Designed to manipulate and chop lenses during Phacoemulsification. The broad surface facilitates moving lens fragments to the needle while the front and rear notches allow hooking and pushing iris tissue, placement and removal of pupil expansion rings and IOL manipulation. Overall length: 110mm.

Snapper Lens Chopper

Product number: E0729

Designed to gently manipulate the cataract during lens removal. The blunt leading surface is designed to be atraumatic while the inner aspect provides a wedge-shaped chopping edge for efficient dissection of the lens nucleus. Angled shaft offers flexibility and ease of manipulation. Overall length: 112 mm.

Osher "Y" Hook

Product number: E0577

Designed for manipulating one piece lenses. The “Y" hook is excellent for capturing haptics and centering the lens. Straight shaft with “Y" shaped tip. Round knurled handle with dull finish. Overall length: 124mm.

Fenzl Insertion Hook

Product number: E0572

Angled 45°, 10mm shaft with 0.2mm tip. Round knurled handle with dull finish. Overall length: 117mm.

O'Gawa Lens Dialer

Product number: E0569

Excellent for manipulation of the intraocular lens in the capsular bag. The angled and curved shaft allows the instrument to reach across the implant and catch the optic/haptic junction to facilitate dialing the lens. Overall length: 120mm.

Sinskey Iris and IOL Hook

Product number: E0545

0.2mm hook with straight shaft and flat serrated handle. Used to mark the visual axis. Polished finish. Overall length: 118mm.

Clayman Guide

Product number: E0542

0.2mm Sinskey hook with shaft angled 45°. 10mm from tip to bend. Flat smooth handle with polished finish. Overall length: 116mm.

Kuglen Push Pull Hook

Product number: 6-400

Small “H" shaped push-pull tip. Shaft angled 45°, 9mm from tip. Round knurled handle with dull finish. Titanium. Overall length: 122mm.

Sinskey Hook II Round Handle Titanium

Product number: 6-250

0.18mm diameter angled tip, 10mm angled shaft. Used to mark the visual axis. Round knurled handle with dull finish. Titanium. Overall length: 119mm.

Nucleus Dividing Hook

Product number: 55483

This instrument has a 45 ° angle and is designed for chopping and manipulating the nucleus. Overall length is 100 mm

Nucleus Spatula and Chopper Double Ended

Product number: 55482

Double ended instrument: The chopper on one end is designed for chopping the nucleus. The spatula on the other end is used for the manipulation of nucleus and IOL. Overall length is 126 mm

Iris Hook and Nucleus Chopper Double Ended

Product number: 55481

Double-ended instrument: The chopper on one end is designed for chopping the nucleus. The iris hook on the other end is used for the manipulation of tissue, nucleus and IOL. Overall length is 125 mm

Y-Nucleus Manipulator and Chopper Double Ended

Product number: 55480

Double ended instrument: The chopper on one end is designed for chopping the nucleus. The Y manipulator on the other end is used for the manipulation of tissue, nucleus and IOL. Overall length is 122 mm

Reposition Hook, Model Frankfurt

Product number: 55300

0.2 mm hook. 90° angled. Overall length 136 mm

Lund Iris Hook

Product number: 54410

14 mm tip. Angled 45°. Overall length 108 mm

Dardenne Iris Hook

Product number: 54290

rounded. 15 mm tip. Angled 45°. Overall length 115 mm

Reverse Sinskey Hook

Product number: E3119

This instrument is used to begin the dissection in DSEK surgery by scoring Descemet’s membrane. It is then used to gently strip the membrane. Overall length: 117mm.

Trapezoidal knife 1.8 - 2.2 mm angled

Product number: LP7603

A = 1.8 mm, B = 2.2 mm, E = 2.0 mm.

Trapezoidal knife 1.6 - 1.8 mm angled

Product number: LP7600

A = 1.6 mm, B = 1.8 mm, E = 2.0 mm.

Trapezoidal knife 1.5 - 1.7 mm angled

Product number: LP7599

A = 1.5 mm, B = 1.7 mm, E = 2.20 mm.

Stab knife 45 degree

Product number: LP7545

A = 45°, B = 1.8 mm, C = 11.0 mm.

Stab knife 30 degree

Product number: LP7530

A = 30°, B = 1.6 mm, C = 11.0 mm.

Stab knife 22.5 degree

Product number: LP7522

A = 22.5°, B = 1.6 mm, C = 11.0 mm.

Stab knife 15 degree

Product number: LP7515

A = 15°, B = 1.6 mm, C = 11.0 mm.

Slit knife 3.2 mm angled bevel up

Product number: LP7557A

B = 3.2 mm, C = 3.2 mm.

Slit knife 2.8 mm angled double bevel

Product number: LP7552ADB

A = 2.8 mm, B = 3.2 mm.

Slit knife 2.65 mm angled double bevel

Product number: LP7551ADB

A = 2.65 mm, B = 2.8 mm.

Slit knife 2.65 mm angled bevel up

Product number: LP7551A

A = 2.65 mm, B = 3.7 mm.

Slit knife 2.4 mm angled double bevel

Product number: LP7549ADB

A = 2.4 mm, B = 2.5 mm.

Fogla Pointed Dissector

Product number: E0480

This instrument is designed to facilitate lamellar dissection of corneal stroma allowing the introduction of the Fogla Air Injection Cannula (E4924) for creation of the “big bubble" (plane separation between Descemet’s membrane and corneal stroma). The sharp tip and rounded shaft give a more controlled creation of the lamellar pocket in DALK surgery. Overall length: 117mm.

Clear corneal knife 1.3 mm angled

Product number: LP7594

A = 1.3 mm, B = 1.4 mm.

Irrigation handpiece 19GA

Product number: 85902ST19

Irrigation handpiece with SurelockTM luer connector for Stellaris®. Curved shaft. Smooth tip. Two lateral irrigation ports of 0.6mm Ø. Outer diameter 1.07mm (19GA). Grey colour-coded handle. Packaged single. Sterile. 12/box.

Irrigation handpiece 20GA

Product number: 85902S20

Curved shaft. Smooth tip. Two lateral irrigation ports of 0.6mm Ø. Outer diameter 0.89mm (20GA). Blue colour-coded handle. Packaged single. Sterile. 12/box.

Irrigation handpiece 19GA

Product number: 85902S19

Curved shaft. Smooth tip. Two lateral irrigation ports of 0.6mm Ø. Outer diameter 1.07mm (19GA). Blue colour-coded handle. Packaged single. Sterile. 12/box.

Irrigation handpiece 23GA

Product number: 85807ST

Irrigation Handpiece with SurelockTM luer connector for Stellaris® System. Curved shaft. Smooth tip. Two lateral irrigation ports. Outer diameter 0.6mm (23GA). Grey colour-coded handle. Packaged single. Sterile. 12/box.

Irrigation handpiece 23GA

Product number: 85807S

Curved shaft. Smooth tip. Two lateral irrigation ports. Outer diameter 0.6mm (23GA). Blue colour-coded handle. Packaged single. Sterile. 12/box.

Irrigation handpiece 22GA

Product number: 85806ST

Irrigation Handpiece with SurelockTM luer connector for Stellaris® System. Curved shaft. Smooth tip. Two lateral irrigation ports. Outer diameter 0.7mm (22GA). Grey colour-coded handle. Packaged single. Sterile. 12/box.

Irrigation handpiece 22GA

Product number: 85806S

Curved shaft. Smooth tip. Two lateral irrigation ports. Outer diameter 0.7mm (22GA). Blue colour-coded handle. Packaged single. Sterile. 12/box.

Irrigation Handpiece 23GA

Product number: 85791S

Curved shaft. Central irrigation port. Outer diameter 0.67mm (23GA). Blue colour-coded handle. Packaged single. Sterile. 12/box.

Irrigation handpiece 22GA

Product number: 85789S

Curved shaft. Central irrigation port. Outer diameter 0.7mm (22GA). Blue colour-coded handle. Packaged single. Sterile. 12/box.

Irrigation handpiece 21GA

Product number: 85787ST

Irrigation Handpiece with SurelockTM luer connector for Stellaris® System. Curved shaft. Smooth tip. Two lateral irrigation ports of 0.6mm Ø. Outer diameter 0.8mm (21GA). Grey colour-coded handle. Packaged single. Sterile. 12/box.

Irrigation handpiece 21GA

Product number: 85787S

Curved shaft. Smooth tip. Two lateral irrigation ports of 0.6mm Ø. Outer diameter 0.8mm (21GA). Blue colour-coded handle. Packaged single. Sterile. 12/box.

Irrigation Handpiece 21GA

Product number: 85781S

Curved shaft. Roughened tip. Two lateral irrigation ports of 0.6mm Ø. Outer diameter 0.8mm (21GA). Blue colour-coded handle. Packaged single. Sterile. 12/box.

Irrigation Handpiece

Product number: 85955

female. Round handle 7 mm Ø. 95 mm

Irrigation Handpiece 20GA

Product number: 85805

Irrigation Handpiece. 20GA. Smooth tip. Two irrigation side ports of 0.6mm. Blue colour-coded handle.

Irrigation Handpiece 19GA

Product number: 85803

Irrigation Handpiece. 19GA. Smooth tip. Two irrigation side ports of 0.6mm. Blue colour-coded handle.

Irrigation Handpiece 21GA

Product number: 85779

slightly curved. 0.5 mm irrigation port. Smooth tip. Outer diameter 0.8mm (21GA)

Irrigation Handpiece 21GA

Product number: 85777

curved. Sandblasted tip. Central irrigation port. outer diameter 0.8mm (21GA)

Irrigation Handpiece 21GA

Product number: 85775

curved. Two 0.5 mm irrigation ports. Tapered tip. Roughened. 21GA (outer diameter 0.8mm)

Irrigating Chopper 19GA

Product number: 85809

Irrigating instrument for divide and conquer technique during biaxial phaco. Two lateral irrigation ports and one posterior facing irrigation port. Outer diameter 1.1mm (19GA).

Irrigating Chopper 19GA

Product number: 85800

Irrigating chopper for bimanual phaco. Tip length 0.95mm. Two irrigation side ports of 0.8mm. Outer diameter 1.1mm (19GA).

Stellaris® System Zero Phaco Handpiece for Femtocataract 2.2mm

Product number: SUP06ST

Designed for aspirating softened nuclei during Femtosecond cataract surgery. The single-use handpiece is designed with an open port aspiration tube with 30° bevel. Recommended for use in a 2.2mm incision. Designed for use with the Stellaris® System. Packaged sterile. Single-Use. 12/box

Zero Phaco Handpiece for Femtocataract 2.2mm

Product number: SUP06

MICS CapsuleGuard IA® Handpiece 45°

Product number: 85915ST

This instrument features a flexible 45 degree tip design for effective cortical removal. Recommended for use in a sub 2.0mm incision. The smooth irrigation and aspiration ports eliminate sharp edges for reduced risk of capsule rupture. The silicone tip design facilitates cortex removal. Capsule polishing. viscoelastic removal in the capsular bag and the semi-transparent silicone sleeve provides visualization. A fully assembled single-use design is provided for safety. Consistency and convenience. Designed for use with the Stellaris® System. Packaged sterile. Single-Use. Overall length 138mm

MICS CapsuleGuard IA® Handpiece, 45°

Product number: 85915S

MICS CapsuleGuard IA® Handpiece straight

Product number: 85914ST

This instrument features a flexible straight tip design for effective cortical removal. Recommended for use in a sub 2.0mm incision. The smooth irrigation and aspiration ports eliminate sharp edges for reduced risk of capsule rupture. The silicone tip design facilitates cortex removal. Capsule polishing. viscoelastic removal in the capsular bag and the semi-transparent silicone sleeve provides visualization. A fully assembled single-use design is provided for safety. Consistency and convenience. Designed for use with the Stellaris® System. Packaged sterile. Single-Use. 12/box. Overall length 138mm

MICS CapsuleGuard IA® Handpiece, straight, sterile

Product number: 85914S

This instrument features a flexible straight tip design for effective cortical removal. Recommended for use in a sub 2.0mm incision. The smooth irrigation and aspiration ports eliminate sharp edges for reduced risk of capsule rupture. The silicone tip design facilitates cortex removal. Capsule polishing. viscoelastic removal in the capsular bag and the semi-transparent silicone sleeve provides visualization. A fully assembled single-use design is provided for safety. Consistency and convenience. Designed for use with most competitive systems. Packaged sterile. Single-Use. Overall length 138mm

CapsuleGuard IA® Handpiece curved

Product number: 85913ST

This instrument features a flexible curved tip design for effective cortical removal. Recommended for use in a 2.2 - 2.8mm incision. The smooth irrigation and aspiration ports eliminate sharp edges for reduced risk of capsule rupture. The silicone tip design facilitates cortex removal. Capsule polishing. viscoelastic removal in the capsular bag and the semi-transparent silicone sleeve provides superior visualization. A fully assembled single-use design is provided for safety. Consistency and convenience. Designed for use with the Stellaris® System. Packaged sterile. Single-Use. Overall length 137mm

CapsuleGuard IA® Handpiece curved

Product number: 85913S

This instrument features a flexible curved tip design for effective cortical removal. Recommended for use in a 2.2 - 2.8mm incision. The smooth irrigation and aspiration ports eliminate sharp edges for reduced risk of capsule rupture. The silicone tip design facilitates cortex removal. Capsule polishing. viscoelastic removal in the capsular bag and the semi-transparent silicone sleeve provides superior visualization. A fully assembled single-use design is provided for safety. Consistency and convenience. Designed for use with most competitive systems. Packaged sterile. Single-Use. Overall length 137mm

CapsuleGuard IA® Handpiece straight

Product number: 85912ST

This instrument features a flexible straight tip design for effective cortical removal. Recommended for use in a 2.2 - 2.8mm incision. The smooth irrigation and aspiration ports eliminate sharp edges for reduced risk of capsule rupture. The silicone tip design facilitates cortex removal. Capsule polishing. viscoelastic removal in the capsular bag and the semi-transparent silicone sleeve provides superior visualization. A fully assembled single-use design is provided for safety. Consistency and convenience. Designed for use with the Stellaris® System. Packaged sterile. Single-Use. Overall length 137mm

CapsuleGuard IA® handpiece straight

Product number: 85912S

This instrument features a flexible straight tip design for effective cortical removal. Recommended for use in a 2.2 - 2.8mm incision. The smooth irrigation and aspiration ports eliminate sharp edges for reduced risk of capsule rupture. The silicone tip design facilitates cortex removal. Capsule polishing. viscoelastic removal in the capsular bag and the semi-transparent silicone sleeve provides superior visualization. A fully assembled single-use design is provided for safety. Consistency and convenience. Designed for use with most competitive systems. Packaged sterile. Single-Use. Overall length 137mm

CapsuleGuard IA® Handpiece 45°

Product number: 85910ST

This instrument features a flexible 45° tip design for effective cortical removal. Recommended for use in a 2.2 - 2.8mm incision. The smooth irrigation and aspiration ports eliminate sharp edges for reduced risk of capsule rupture. The silicone tip design facilitates cortex removal. Capsule polishing. viscoelastic removal in the capsular bag and the semi-transparent silicone sleeve provides superior visualization. A fully assembled single-use design is provided for safety. Consistency and convenience. Designed with luer-lock design for the Stellaris® System. Packaged sterile. Single-Use. Overall length 137mm

CapsuleGuard IA® Handpiece 45°

Product number: 85910S

This instrument features a flexible 45° tip design for effective cortical removal. Recommended for use in a 2.2 - 2.8mm incision. The smooth irrigation and aspiration ports eliminate sharp edges for reduced risk of capsule rupture. The silicone tip design facilitates cortex removal. Capsule polishing. viscoelastic removal in the capsular bag and the semi-transparent silicone sleeve provides superior visualization. A fully assembled single-use design is provided for safety. Consistency and convenience. Designed for use with most competitive systems. Packaged sterile. Single-Use. Overall length 137mm

I/A Handpiece 45° with sleeve For 1.8 C-MICS

Product number: 85795ST

I/A Handpiece with SurelockTM luer connector for Stellaris®. 45° angled tip with silicone irrigation sleeve. For 1.8mm incision. 0.3mm aspiration port. Packaged single. Sterile. 12/box.

I/A Handpiece curved with sleeve For 1.8 C-MICS

Product number: 85794ST

I/A Handpiece with SurelockTM luer connector for Stellaris®. Curved shaft with silicone irrigation sleeve. For 1.8mm incision. 0.3mm aspiration port. Packaged single. Sterile. 12/box.

I/A Handpiece tip 90°,16GA

Product number: 85786ST

I/A Handpiece with SurelockTM luer connector for Stellaris®. Straight shaft with 90° angled aspiration tip. Ideal for 12 o'clock cortical material removal. 0.3mm aspiration port. Outer diameter 1.65mm (16GA). Packaged single. Sterile. 12/box.

I/A Handpiece tip 90°,16GA

Product number: 85786S

Straight shaft with 90° angled aspiration tip. Ideal for 12 o'clock cortical material removal. 0.3mm aspiration port. Outer diameter 1.65mm (16GA). Packaged single. Sterile. 12/box.

I/A handpiece straight with sleeve

Product number: 85785S

Straight tip with silicone irrigation sleeve for standard phaco incision. Aspiration cannula 0.9mm (20G). 0.3mm aspiration port. Packaged single. Sterile. 12/box.

I/A Handpiece 45°, 17GA

Product number: 85784ST

I/A Handpiece with SurelockTM luer connector for Stellaris®. Straight shaft with 45° angled aspiration tip. 0.3mm aspiration port. Outer diameter 1.5mm (17GA). Packaged single. Sterile. 12/box.

I/A handpiece tip 45°, 17GA

Product number: 85784S

Straight shaft with 45° angled aspiration tip. For optimal 360° cortical material removal. 0.3mm aspiration port. Outer diameter 1.5mm (17GA). Packaged single. Sterile. 12/box.

I/A Handpiece curved, 17GA

Product number: 85783ST

I/A Handpiece with SurelockTM luer connector for Stellaris®. Curved shaft. Ideal for deep-set eyes. 0.3mm aspiration port. Outer diameter 1.5mm (17GA). Packaged single. Sterile. 12/box.

I/A Handpiece curved, 17GA

Product number: 85783S

Curved shaft. Ideal for deep-set eyes. 0.3mm aspiration port. Outer diameter 1.5mm (17GA). Packaged single. Sterile. 12/box.

I/A handpiece straight, 17GA

Product number: 85782S

Straight tip for initial cortical removal. 0.3mm aspiration port. Outer diameter 1.5mm (17GA). Packaged single. Sterile. 12/box.

SILKO I/A Handpiece, Angled 90º with Sleeve

Product number: 85771

20GA cannula. Tip angled 90° With standard sleeve (D8109). 0.3 mm aspiration port. Blue silicone coated handle ensures firm grip. Luer steel connectors. Overall length 138.5 mm

SILKO I/A Handpiece, Angled 20º with Sleeve

Product number: 85770

20GA cannula. Tip angled 20° with standard sleeve. 0.3 mm aspiration port. Blue silicone coated handle ensures firm grip. Luer steel connectors. Overall length 138.5 mm

SILKO I/A Handpiece, Angled 60º, 17/23GA

Product number: 85766

20 mm shaft angled 60° with 17GA outer cannula (coaxial irrigation) and 23GA inner cannula (aspiration). 0.3 mm aspiration port. Blue silicone coated handle ensures firm grip. Luer steel connectors. Overall length 143 mm

SILKO I/A Handpiece, Angled 60º, 16/22GA

Product number: 85765

20 mm shaft angled 60° with 16GA outer cannula (coaxial irrigation) and 22GA inner cannula (aspiration). 0.3 mm aspiration port. Blue silicone coated handle ensures firm grip. Luer steel connectors. Overall length 143 mm

SILKO I/A Handpiece, Curved, 17/23GA

Product number: 85764

19.5 mm shaft with 17GA outer cannula (coaxial irrigation) and 23GA inner cannula (aspiration). 0.3 mm aspiration port. Blue silicone coated handle ensures firm grip. Luer steel connectors. Overall length 142 mm

SILKO I/A Handpiece, Curved, 16/22GA

Product number: 85763

19.5 mm shaft with 16GA outer cannula (coaxial irrigation) and 22GA inner cannula (aspiration). 0.3 mm aspiration port. Blue silicone coated handle ensures firm grip. Luer steel connectors. Overall length 142 mm

SILKO I/A Handpiece, Straight

Product number: 85761

20GA cannula tip. 0.3 mm aspiration port. With standard sleeve (D8109). Blue silicone coated handle ensures firm grip. Luer steel connectors. Overall length 138.5 mm

Aspiration Handpiece 21GA

Product number: 85778R

slightly curved. 0.3 mm aspiration port. Smooth tip. Outer diameter 0.8mm (21GA)

Aspiration Handpiece 21GA

Product number: 85776R

Conical Tip. Roughened. Red colour-coded.

Aspiration Handpiece 21GA

Product number: 85774R

curved. 0.3 mm aspiration port. Tapered tip. Roughened. Outer diameter 0.8mm (21GA)

SILKO Aspirating Cannula Handpiece

Product number: 85772R

red silicone coated handle ensures firm grip. male luer adapter for connection to aspiration line. 95 mm

Aspiration Handpiece

Product number: 85950

male. Round handle 7 mm Ø. 95 mm

Aspiration Handpiece 20GA

Product number: 85804

Conical Tip. Roughened. Red colour-coded.

Aspiration Handpiece 19GA

Product number: 85802

Conical Tip. Roughened. Red colour-coded.

Tuebingen Tying Forcpes

Product number: 63250

Extra delicate. 14 mm jaws. 4 mm tying platform. Overall length 86 mm

McPherson Tying Forceps

Product number: 63160

Straight. 3.5 mm. Overall length 84 mm

Kelman-McPherson Tying Forceps

Product number: 63150

7.5 mm. Angled. Overall length 100 mm

Tying Forceps, Model Tuebingen

Product number: 63052

Conical. 6 mm tying platform. Overall length 101 mm

Harms Tying Forceps Model Tuebingen

Product number: 63051

Straight. 7 mm tying platform. Overall length 113 mm

Schaedel Towl Clamp

Product number: E6774

Non-magnetic. Cross-action. Overall length 85 mm

Dieffenbach Serrefine

Product number: E3904

Straight. 20 mm jaws. polished finish. Overall length 55 mm

Dieffenbach Serrefine

Product number: E3900

straight. 10 mm serrated jaws. polished finish. Overall length 36 mm

Micro Serrefine

Product number: E3897

9 mm jaws designed for 10-0 sutures. Overall length 26 mm

Dieffenbach Serrefine

Product number: 77012

12 mm curved serrated jaws. Overall length 37 mm

Dieffenbach Serrefine

Product number: 77011

12 mm straight serrated jaws. Overall length 37 mm

Bishop-Harmon Dressing Forceps

Product number: E1506

With serrations. Overall length 100 mm

Bishop-Harmon Tissue Forceps

Product number: E1502

Straight 1 x 2 delicate teeth. 86 mm

Bishop-Harmon Tissue Forceps

Product number: E1500

Straight 1 x 2 fine teeth. Overall length 86 mm

Light Curved Dressing Forceps

Product number: E1410

With heavy serrations. Overall length 98 mm

Strong Curved Dressing Forceps

Product number: E1408

With delicate serrations. Overall length 97 mm

Curved Dressing Forceps

Product number: E1406

With delicate serrations. Overall length 99 mm

Straight Dressing Forceps

Product number: E1404

With heavy serrations. 12 mm tips. Overall length 103 mm

Tissue Forceps

Product number: E1400

Straight 11 mm tips. extra delicate. Overall length 100 mm

Tissue Forceps

Product number: 64021

Straight 1.0 length 100 mm

Tissue Forceps

Product number: 64020

Straight 0.7 mm. extra delicate. Overall length 103 mm

Dressing Forceps

Product number: 64011

Straight 1.0 mm. Overall length 102 mm

Lieberman Suturing Forceps

Product number: E1817 S

Colibri style tips. Double toothed tips with 0.10mm teeth spaced 1mm apart and 7.5mm tying platform. Wide serrated handle with poli

McPherson Suturing-Corneal Forceps

Product number: E1813 S

Straight 1 x 2 teeth. 5 mm tying platform. Overall length 87 mm

McPherson Suturing Corneal Forceps

Product number: E1813 A

Angled 1 x 2 teeth. 5 mm tying platform. Overall length 85 mm

Bonn Suturing Forceps

Product number: E1811 G

Straight 0.12 mm teeth. 6 mm tying platform. 86 mm

Bonn Suturing Forceps

Product number: E1809

Straight shafts with 0,12 mm teeth. Serrated handle with polised finish. Overall length 74 mm

Castroviejo Suturing Forceps 0.5mm Angled

Product number: E1806

Angled 45° shafts with 0.5mm teeth and 5.5mm tying platform. Polished finish. Overall length: 108mm.

Fine-Castroviejo Suturing Forceps

Product number: E1805

0.2 mm teeth. 5,5 mm tying platform. Overall length 108 mm

Castroviejo Suturing Forceps 0.5mm Narrow

Product number: E1800

Straight shafts with teeth and 5.5mm tying platform. Serrated handle with polished finish. Teeth: 0.5mm. Overall length: 108mm.

Stern-Castroviejo Suturing Forceps 0.5mm

Product number: E1798 S

Straight shafts with 0.5mm teeth and 6mm tying platform. Wide serrated handle with thumb catch lock and polished finish. Overall length: 108mm.

Castroviejo Suturing Forceps

Product number: E1798

0.5 mm teeth. 5.5 mm tying platform. Overall length 109 mm

Castroviejo Suturing Forceps

Product number: E1797

1 x 2 teeth. 0.3 mm. 6 mm tying platform. Overall length 109 mm

Castroviejo Suturing Forceps 0.12mm

Product number: E1796

Straight shafts with teeth and 5.5mm tying platform. Wide serrated handle with polished finish. Teeth: 0.12mm. Overall length: 108mm.

Osher Forceps Elschnig Teeth 0.12mm

Product number: E1564

The Elschnig teeth of this forceps are ideal for grasping sclera during suturing. Delicate tying platform handles the finest suture material. 0.12mm, 1 x 2 teeth, 3mm platform. Overall length: 104mm.

Bonn Suturing Forceps 0.12mm Titanium

Product number: 2-110

0.12mm 1 x 2 teeth with 6mm platform. Flat serrated handle with dull finish. Titanium. Overall length: 85mm.

Barsewisch Anterior Chamber Forceps

Product number: 65150G

45° angled. Tying platform 1.5 length 73 mm

Suturing Forceps Mod. Zuerich

Product number: 63120

Straight. 4.5 mm tying platform. 78 mm

Castroviejo Suturing Forceps

Product number: 62042

1 x 2 teeth 0.9 mm. 6.5 mm tying platform. Overall length 101 mm

Castroviejo Suturing Forceps

Product number: 62041

1 x 2 teeth 0.5 mm. 6.5 mm tying platform. Overall length 101 mm

Trocar Ports Grasping Forceps

Product number: 65365

Forceps for grasping trocar ports in 23G and 25G PPV surgery. For easy removal of trocar port from sclera. Compatible with the Bausch + Lomb Entry Site Alignment (ESA) valved cannula system.

Halstead Curved Hemostatic Forceps

Product number: E3922

Curved 22 mm serrated jaws. Ring handle with ratchet lock. Overall length 120 mm

Halstead Straight Hemostatic Forceps

Product number: E3920

Straight 22 mm serrated jaws. Ring handle with ratchet lock. Overall length 125 mm

Hartman Curved Hemostatic Forceps

Product number: E3916

Curved 20 mm serrated jaws. Ring handle with ratchet lock. Overall length 99 mm

Hartman Straight Hemostatic Forceps

Product number: E3915

Straight 20 mm serrated jaws. Ring handle with ratchet lock. Overall length 99 mm

Jameson Muscle Forceps Left Child Size

Product number: E2334

Angled shafts with 9mm scaled jaws. 1mm teeth on one jaw fit into holes on the other jaw. Slide lock and serrated handle with polished finish. Left. Overall length: 99mm.

Jeweler Type Forceps Extra Fine Tying Platform Narrower

Product number: E1947 T5

Straight, shafts more narrow where shaft meets the handle. Extra fine pointed tips and 6mm tying platform. Smooth handle with dull finish. Overall length: 110mm

Jeweler Type Forceps Fine Tying Platform

Product number: E1947 T1

Straight shafts with pointed tips and 6mm tying platform. Smooth handle with dull finish. Fine pointed tips. Overall length: 120mm.

Nugent Utility Forceps

Product number: E1892

Angled serrated 10 mm jaws. Overall length 107 mm

Gill Curved Iris Forceps

Product number: E1475

Delicate curved shafts. Serrated tips. Serrated handle. Overall length 72mm

Iris Forceps, Bonn-Conrads

Product number: 64220

Serrated. Overall length 73 mm

Iris Forceps, Mod. Bonn

Product number: 64091

Delicate. Angular. Overall length 75 mm

Iris Forceps, Mod. Bonn

Product number: 64090

Delicate. Overall length 75 mm

Juenemann IOL Explantation Forceps

Product number: 65530

The serrated forceps is designed for explantation of Silicone IOLs without cutting. The serrations of the slim jaws help to securily grasp the IOL inside the capsular bag. Minimum incision size is 2.5mm.

Osher-Seibel Folding Forceps

Product number: E2976

A gently curved forceps designed to easily fold today’s soft intraocular lenses. The serrated handle ensures a firm grip throughout the folding procedure. Overall length: 107mm.

Doden Implant Forceps

Product number: 65400

With perforated handle. 9 mm jaws. Overall length 120 mm

IOL Grasping Forceps

Product number: 65245

Delicate round jaws, angled 50°. Overall length 110 mm

Pierse Colibri Forceps Micro

Product number: E1943 22

Colibri style 0.1mm Pierse tips. Flat open handle with dull finish. Overall length: 78mm.

Castroviejo Fixation Forceps

Product number: E1793

Straight shafts. 1 x 2 teeth 0.3 mm. Overall length 108 mm

MacGregor Conjunctiva Forceps

Product number: E1735

Straight shafts with 5.5mm tying platform and 1mm crisscross serrated tips. Serrated handle with polished finish. Overall length: 108mm.

Thorpe Conjunctival Fixation Forceps

Product number: E1730

Straight shafts with 90 degree. 2 x 3 teeth. With tying platform. Overall length 94 mm

Osher Conjunctival Fixation Forceps 0.3mm

Product number: E1717

Straight shafts with 5.5mm tying platform and 45° 0.3mm teeth. Wide serrated handle with polished finish. Overall length: 108mm.

Elschnig Fixation Forceps

Product number: E1684

Straight shafts with 2.0mm. 1 x 2 Elschnig style teeth. Narrow handle. Overall length 109 mm

Lester Fixation Forceps

Product number: E1656

Fine 2 x 3 teeth. Overall length 96 mm

Lester Fixation Forceps

Product number: E1654

Fine 1 x 2 teeth. Overall length 96 mm

Graefe Fixation Forceps

Product number: E1560

With narrow 3.5 mm jaws. Fine teeth. Without lock. Overall length 108 mm

Moody Curved Fixation Forceps

Product number: E1553

Curved shafts with 0.5mm, 1 x 2 teeth. Serrated handle with thumb catch lock and polished finish. Overall length: 108mm.

Polack Double Corneal Forceps Colibri Style

Product number: E3215

Two 2.75mm long tips separated 1mm with 1 x 2 teeth. Serrated handle with dull finish. Overall length: 71mm.

Troutman-Barraquer Corneal Utility Forceps

Product number: E3199

Colibri style. 1 x 2 teeth 0.12 mm. Overall length 73 mm

Katzin-Barraquer Corneal Forceps

Product number: E3190

7 mm tying platform with 1 x 2 teeth 0.4 mm. Overall length 73 mm

Carlson DSEK Graft Forceps

Product number: E2039

These forceps are designed to grasp the graft for insertion into the anterior chamber. The forceps platforms at the tip provide secure grasp at the tip and a platform at the rear of the forceps arms provide a mechanical stop to prevent crushing the tissue. Overall length: 85mm.

Snyder Stripping Forceps

Product number: E2015

Tips of these forceps are angled upwards to grasp the edge of Descemet’s membrane to complete the stripping technique. Iris stop allows the surgeon to reliably grasp the membrane without grasping iris or other ocular structures. Overall length: 83mm.

Colibri Forceps 0.12mm

Product number: 2-132

0.12mm 1 x 2 teeth with 5mm platform and 2mm angled tips. Flat serrated handle, dull finish. Titanium. Overall length: 86mm.

Troutman-Barraquer Colibri Type Forceps

Product number: 63038

Extremely fine. 0.12 mm teeth. Overall length 73 mm

Colibri Type Forceps

Product number: 63032

Extra delicate. 5 mm tying platform. Overall length 77 mm

Colibri Type Forceps

Product number: 63031

5 mm tying platform. Overall length 75 mm

Corneal flap Forceps LASIK

Product number: 63020

Smooth tip forceps allows to manipulate and smooth the corneal flap. Also ideal for grasping/holding foldable IOLs. Tip angled 11mm.

Draeger Conjunctiva Forceps

Product number: 62130

Two pins 0.5 mm. 1.0 mm tip. Overall length 99 mm

Cilia Forceps

Product number: E2160

narrow smooth jaws. Overall length 83 mm

Cilia Forceps

Product number: E2156

1x3 mm smooth platforms. Overall length 76 mm

Gradle Cilia Forceps

Product number: 61050

Rounded jaws. Overall length 100 mm

Henry Cilia Forceps

Product number: 61040

Straight jaws. Overall length 99 mm

Beer Cilia Forceps

Product number: 61010

Round point. Overall length 78 mm

Devgan Micro Capsulorhexis Forceps

Product number: ET2012

The ultra-fine tips of this cross action forceps are ideal for small incision procedures, including sub-2 mm coaxial phaco incisions. The mildly sharpened tips are designed to allow the surgeon to puncture the capsule and securely grab the capsule. 2.5 mm and 5.0 mm marks on the shafts are designed as a measuring tool, providing the radius and diameter of the capsulorhexis as it is being created. An iris stop feature is designed to provide the surgeon with excellent grasp of the capsule without engaging the iris. The cross action handle is designed for excellent alignment of the fine tips, reducing wound gape, loss of viscoelastic and AC shallowing. Overall length: 119mm.

Maloney Capsulorhexis Forcep

Product number: ET2009

Forceps with gently curved jaws and ultra fine sharpened tips for puncture and grasping the capsule. Round handle is excellent for precise finger-tip control. Titanium. Overall length: 104mm.

Lehner-Utrata Capsulorhexis Forceps Round Handle Titanium

Product number: ET2002 RC

Utrata-like fine angled tips with gently curved shaft for performing capsulorhexis through tunnel incisions. Dull finish. Round handle manufactured in titanium. Overall length: 112mm.

Utrata Capsulorhexis Forceps Titanium

Product number: ET2002

Fine angled tips ideal for grasping delicate capsule. Angled 12mm shafts with iris stop allows ease of movement in the anterior chamber. Flat handle with dull finish. Titanium. Overall length: 80mm.

Utrata MICS Capsulorhexis Forceps Titanium

Product number: ET1202

Fine angled tips ideal for grasping delicate capsule during 1.8mm MICS™ procedures. Angled 13mm shafts with iris stop allows ease of movement in the anterior chamber. Titanium handle designed after the Stellaris® System handpiece. Overall length: 107mm.

MICS 1.0mm Capsulorhexis Forceps

Product number: SUI20-12

Angled endgripping platforms for grasping delicate capsule. 23G shaft designed for performing capsulorhexis through a 1.0mm incision. Low glare instrument shaft

Silverstein MICS 1.8mm Capsulorhexis Forceps

Product number: E2026

This unique styled forceps are ultra-thin profile, allowing maximum maneuverability through a sub-2.0mm incision, without oar-locking or unnecessary distortion of the wound architecture during capsulorhexis. In addition, the 5.0mm and 6.0mm marks on the anterior blade surface allows the surgeon to create consistent, central capsulorhexis. Overall length: 81mm.

Utrata Capsulorhexis Forceps Sharp Tips

Product number: E2002 S

The popular E2002 Utrata Capsulorhexis Forceps with fine angled sharp tips. Angled 12mm shafts with an iris stop. Flat handle with dull finish. Overall length: 80mm.

Lehner-Utrata Capsulorhexis Forceps Round Handle

Product number: E2002 RC

Utrata-like fine angled tips with gently curved shaft for performing capsulorhexis through tunnel incisions. Dull finish. Round Handle. Overall length: 112mm.

O'Gawa-Utrata Capsulorhexis Forceps

Product number: E2002 R

Fine angled tips with angled 13mm shafts and iris stop. Round handle for fingertip rotational control. Dull finish. Overall length: 112mm.

Utrata Capsulorhexis Forceps

Product number: E2002 GE

Fine angled tips and 12 mm shafts. With iris stop. Overall length 87 mm

Gimbel Capsulorhexis Forceps

Product number: E2002 G

Similar in construction to the E2002 Utrata Capsulorhexis Forceps with jaw set to open only 3mm. Light tension. Flat handle with dull finish. Overall length: 80mm.

Utrata Capsulorhexis Forceps

Product number: E2002 F

delicate. fine angled tips ideal for grasping delicate capsule during 1.8mm MICS procedures. And 12 mm shafts. Overall length 87 mm

Capsulorhexis Forceps

Product number: 65050

Curved. Overall length 102 mm

Osher Capsule-Foreign Body Forceps

Product number: E2077

Fine 3.0mm platform. Platform angled 60° 10mm from angle to tip. Serrated handle with dull finish. Overall length: 80mm.

Thornton Fine Fixation Ring 13mm

Product number: ET9020

Open ring design for globe fixation during various ocular procedures. 13mm in diameter with blunt fixation points. Swivel handle provides increased flexibility. Titanium. Overall length: 107mm.

Thornton Fine Fixation Ring 16mm

Product number: ET9019

Open ring design for globe fixation during various ocular procedures. 16mm in diameter with blunt fixation points. Swivel handle provides increased flexibility. Titanium. Overall length: 108mm.

Khan Scleral Shield

Product number: ET4600

The Khan Shield manufactured in titanium helps to protect the globe during laser assisted blepharoplasty procedures. The oval shield was designed for patient comfort and includes anti-rotational posts and lash traction bar. Measures: 23mm x 28mm.

Cornea Silicone Light Shield

Product number: 99441Y2

transparent. For corneal protection. Non-sterile. Autoclavable. Light blue. 18 mm

Cornea Silicone Light Shield

Product number: 99441Y1

for corneal protection. Non-sterile. Autoclavable. Blue. 18 mm

25GA Passive Aspiration Handpiece

Product number: SUJ07

Passive Aspiration Handpiece ready for use with 25G blunt needle. For passive aspiration of fluid from the eye during vitreoretinal procedures. Single Use, packaged sterile, 12/box.

23GA Passive Aspiration Handpiece

Product number: SUJ06

Passive Aspiration Handpiece ready for use with 23G blunt needle. For passive aspiration of fluid from the eye during vitreoretinal procedures. Single Use, packaged sterile, 12/box.

23GA Passive Aspiration Handpiece

Product number: SUJ03

Passive Aspiration Handpiece 23 Gauge ready for use with 1.5mm Soft tip cannula. For passive aspiration of fluid from the eye during vitreoretinal procedures. Soft flexible tip on the cannula provides atraumatic entry through retinal or macular tears or holes. Single Use, packaged sterile, 12/box.

25GA Passive Aspiration Handpiece

Product number: SUJ02

Passive Aspiration Handpiece ready for use with 1.5mm 25G Soft tip cannula. For passive aspiration of fluid from the eye during vitreoretinal procedures. Soft flexible tip on the cannula provides atraumatic entry through retinal or macular tears or holes. Single Use, packaged sterile, 12/box.

23GA Passive Aspiration Handpiece

Product number: SUJ01

Passive Aspiration Handpiece 23 Gauge ready for use with 3.0mm Soft tip cannula. For passive aspiration of fluid from the eye during vitreoretinal procedures. Soft flexible tip on the cannula provides atraumatic entry through retinal or macular tears or holes. Single Use, packaged sterile, 12/box.

25GA Backflush/Extrusion Handpiece for active & passive aspiration with blunt tip

Product number: SUJ14

25G handpiece with blunt tip, blue colour coding ring. Delivered with silicone tube with male and female luer connector either for connection to the machine or for connection to the handpiece without use of the machine to facilitate flow outside of immediate surgical field. Male luer slip coupler for connection to machine tubing. Non vented male luer cap, optional for use as backflush handpiece.

23GA Backflush/Extrusion Handpiece for active & passive aspiration with soft tip

Product number: SUJ13

23G handpiece with soft tip, green colour coding ring. Delivered with silicone tube with male and female luer connector either for connection to the machine or for connection to the handpiece without use of the machine to facilitate flow outside of immediate surgical field. Male luer slip coupler for connection to machine tubing. Non vented male luer cap, optional for use as backflush handpiece.

23GA Backflush/Extrusion Handpiece for active & passive aspiration with soft tip brush

Product number: SUJ12

23G handpiece with soft tip brush, green colour coding ring. Delivered with silicone tube with male and female luer connector either for connection to the machine or for connection to the handpiece without use of the machine to facilitate flow outside of immediate surgical field. Male luer slip coupler for connection to machine tubing. Non vented male luer cap, optional for use as backflush handpiece.

23GA Backflush/Extrusion Handpiece for active & passive aspiration with blunt tip

Product number: SUJ11

23G handpiece with blunt tip, green colour coding ring. Delivered with silicone tube with male and female luer connector either for connection to the machine or for connection to the handpiece without use of the machine to facilitate flow outside of immediate surgical field. Male luer slip coupler for connection to machine tubing. Non vented male luer cap, optional for use as backflush handpiece.

20GA Backflush/Extrusion Handpiece for active & passive aspiration with soft tip

Product number: SUJ10

20G handpiece with soft tip, grey colour coding ring. Delivered with silicone tube with male and female luer connector either for connection to the machine or for connection to the handpiece without use of the machine to facilitate flow outside of immediate surgical field. Male luer slip coupler for connection to machine tubing. Non vented male luer cap, optional for use as backflush handpiece.

20GA Backflush/Extrusion Handpiece for active & passive aspiration with soft tip brush

Product number: SUJ09

20G handpiece with soft tip brush, grey colour coding ring. Delivered with silicone tube with male and female luer connector either for connection to the machine or for connection to the handpiece without use of the machine to facilitate flow outside of immediate surgical field. Male luer slip coupler for connection to machine tubing. Non vented male luer cap, optional for use as backflush handpiece.

20GA Backflush/Extrusion Handpiece for active & passive aspiration with blunt tip

Product number: SUJ08

20G handpiece with blunt tip, grey colour coding ring. Delivered with silicone tube with male and female luer connector either for connection to the machine or for connection to the handpiece without use of the machine to facilitate flow outside of immediate surgical field. Male luer slip coupler for connection to machine tubing. Non vented male luer cap, optional for use as backflush handpiece.

Bipolar Scleral Eraser

Product number: E7928

Designed for scleral haemostasis. 45° beveled tip. Lemosa type connector. Sterile single use. 12/box.

Bipolar Eraser

Product number: D8201

for scleral haemostasis. 28.5 mm shaft with 45° beveled tip. plastic covered handle. Autoclavable. Lemosa type adapter. Overall length 131 mm

Straight Bipolar Forceps

Product number: D8200

0.5 mm tip. Autoclavable. Lemosa type adapter. Overall length 90 mm

Bipolar Eraser 27GA 2pin tapered

Product number: E7933

Designed for retinal endodiathermy. 27GA shaft. Conical tip. 2-pin connector. Sterile single use. 12/box.

Bipolar Eraser 23GA lemo tapered

Product number: E7930

Designed for retinal endodiathermy. 23GA shaft. Conical tip. Lemosa type connector. Sterile single use. 12/box.

Bipolar Eraser 20GA lemo tapered

Product number: E7929

Designed for retinal endodiathermy. 20GA shaft. Conical tip. Lemo type connector. Sterile single use. 12/box.

Bipolar Eraser 25GA lemo blunt

Product number: E7927

Designed for retinal endodiathermy. 25GA shaft. 45° beveled tip. Lemosa type connector. Sterile single use. 12/box.

Bipolar Eraser 27GA lemo tapered

Product number: E7932

Designed for retinal endodiathermy. 27GA shaft. Conical tip. Lemosa type connector. Sterile single use. 12/box.

Bipolar Eraser 25GA 2pin blunt

Product number: E7925

Designed for retinal endodiathermy. 25GA shaft. 45° beveled tip. 2-pin connector. Sterile single use. 12/box.

Bipolar Eraser 25GA 2pin tapered

Product number: E7924

Designed for retinal endodiathermy. 25GA shaft. Conical tip. 2-pin connector. Sterile single use. 12/box

Bipolar Eraser 25GA tapered

Product number: E7920

Designed for retinal endodiathermy. 25GA shaft. Conical tip. Plastic covered handle. Autoclavable. Lemo type connector.

Intraocular Diathermy Probe

Product number: D8203

Designed for retinal endodiathermy. 31 mm shaft tapered from 21GA to 23GA at very delicate tip. plastic covered handle. Autoclavable. Lemosa type adapter. Overall length 132 mm

Simcoe Reverse I/A Unit

Product number: E4971 RG

Reverse version of E4971G. Irrigation through silicone tubing. Aspiration through main hub

Simcoe Irrigation/Aspiration Unit

Product number: E4971 G

23GA. 0.4 mm aspiration port. Irrigation through side opening. 300 mm silicone tubing. 16 mm

Charleux Irrigation/Aspiration Cannula

Product number: 85850

Coaxial shaft. Curved approximately 20°. 18GA outer sleeve with two lateral 0.6 mm irrigation ports. 23GA inner cannula with 0.3 mm aspiration port in bevelled tip 30 cm. Silicone tubing and luer lock connector. 30 mm

Corneal Irrigator

Product number: 82020S

Made of plastic. 33 mm. Packaged single. Sterile. 60/box

Charleux Irrigating Cannula

Product number: 85730

Curved approximately 60°. Bevelled irrigation port. Shaft 11 mm

Irrigation Cannula Mod. Bonn

Product number: 85021

14GA. Shaft 25 mm

Cannula LASIK side & central port

Product number: 83011

27GA with rounded tip for easy positioning under the flap. Four lateral irrigation ports either side and one central port allow for complete irrigation of the interface. Curved to follow curvature of the cornea. 8.0mm angle from tip to end.

LASIK Irrigation Cannula

Product number: 83010

For controlled cleaning and rinsing of the stromal bed. Angled. 10 mm from bend to tip. 27GA. 4 ports either side for stromal interface rinsing. 22 mm shaft length

Viscous Fluid Injection Cannula, 4 mm

Product number: E5002

For pressurised posterior injection. 4 mm beveled 20GA tip. platform for scleral suture fixation. 235 mm silicone tubing. Overall length (incl. knurled luer-lock adapter) 260 mm

Viscous Fluid Injection Cannula, 6 mm

Product number: 86015Y3

For pressurised posterior silicone oil injection. 6 mm beveled 20GA tip. platform for scleral suture fixation. 235 mm silicone tubing. Overall length (incl. knurled steel luer-lock adapter) 260 mm

Viscous Fluid Injection Cannula, 5 mm

Product number: 86015Y2

For pressurised posterior silicone oil injection. 5 mm beveled 20GA tip. platform for scleral suture fixation. 235 mm silicone tubing. Overall length (incl. knurled steel luer-lock adapter) 260 mm

Lucke Viscous Fluid Injection Cannula

Product number: 86016

Cannula self fixating. 5mm shaft from platform to tip. 20GA tip beveled 45°. Slightly conical 2mm shaft portion enlarged from 20GA to 19 GA creating gap of 0.6mm beneath platform for scleral self-fixation. 4.5mm Ø. olive type tubing connector. 10.5mm

Hydrodissection Cannula 25 Gauge Micro J Shaped

Product number: SD5003/10

25 gauge. Hydrodissection/Aspiration Cannula. Round tip, 1.75 mm wide. J-shaped tip allows aspiration and irrigation at the 12 o’clock position. Overall length excluding hub: 22mm. 10/box.

Silicone Tip Capsule Polisher 27 Gauge

Product number: SD5005/10

Silicone cap to provide squeegee effect. Overall length excluding hub: 22mm.

Cannula, Probe Point, Mod. Hamburg

Product number: 85110-6

22GA. Shaft 19 mm . 6/box

Engels Capsule Polisher

Product number: 85266

21GA. 0.3 mm aspiration port. Sandblasted tip

Brauweiler Aspiration Cannula

Product number: 85268

21GA. Shaft 20 mm

Rycroft Anterior Chamber Cannula 25 Gauge

Product number: SD1639/10

25 gauge. 5mm Angled 35°. Packaged sterile. Single-Use. 10/Box. Overall length excluding hub: 22mm.

Retrobulbar Cannula

Product number: 87122-6

Straight. 24GA. Shaft 40 mm. 6/box.

Peribulbar Needle 25 Gauge

Product number: SD5108/10

25 Gauge. 10/box. Overall Length Excluding Hub: 32mm.

Retrobulbar Needle 25 Gauge

Product number: SD1637/10

Atkinson style bevel. 25 Gauge. 10/box. Overall Length Excluding Hub: 38mm.

Retrobulbar Needle 25 Gauge

Product number: SD1275/10

25 Gauge. Packaged sterile. Single-Use. 10/box. Tri-facet style point. Overall Length Excluding Hub: 38mm.

Fogla Air Injection Cannula 27 Gauge

Product number: E4924 27

This 27 gauge bottom port cannula is used while injecting air into deep corneal stroma in DALK surgery. The blunt tip helps avoid deeper perforation into the anterior chamber and the flattened cannula is easily inserted into the corneal stromal pocket. The bottom port directs air posteriorly in order to achieve the big bubble. The lamellar track should be created using the Fogla Pointed Dissector (E0480) prior to introducing this cannula. Overall length excluding hub: 18mm.

Fogla Air Injection Cannula 25 Gauge

Product number: E4924 25

This 25 gauge bottom port cannula is used while injecting air into deep corneal stroma in DALK surgery. The blunt tip helps avoid deeper perforation into the anterior chamber and the flattened cannula is easily inserted into the corneal stromal pocket. The bottom port directs air posteriorly in order to achieve the big bubble. The lamellar track should be created using the Fogla Pointed Dissector (E0480) prior to introducing this cannula. Overall length excluding hub: 18mm.

Air Injection Cannula Mod. Tuebingen

Product number: 85100-6

30GA. 14 mm. 6/box.

Sautter Air Injection Cannula

Product number: 85050Y1-6

Turned 90°. 27GA. Shaft 22 mm. 6/box.

Sautter Air Injection Cannula

Product number: 85050-6

27GA. flattened tip. Shaft 22 mm. 6/box.

Castroviejo Caliper

Product number: E2404

Caliper measures from 0mm to 20mm in 1mm increments with scale reading on both sides. Thumbscrew holds tips apart at desired setting. Overall length 86 mm.